Pioneer BDP-51FD Manuel d'utilisateur télécharger pdf (Page 25)

 About the frame/field frequency and NTSC/

PAL TV systems

By factory default setting, the frame/field frequency is set for an

output of 50 Hz, and the video signal output from the S-VIDEO and

VIDEO output terminals is set to be output in the PAL TV system

format. When sources with a frame/field frequency of 60 Hz or

24 Hz are played, the output frame/field frequency automatically

switches to 60 Hz (or 24 Hz for HDMI, depending on the setting), and

the TV system format for the video signal output from the S-VIDEO

and VIDEO output terminals is set to NTSC on PAL TV. When

playback is stopped, the frame/field frequency and TV system

settings remain at the settings last used. The frame/field frequency

and TV system settings do not change even when the power is

turned off. They only switch when a video material with a different

frame/field frequency is played.

If the picture is not displayed on the TV when a source with a

different frame/field frequency is played, use the procedure below to

switch the frame/field frequency and TV system settings for the

signal output from the player.

Eject the disc, then press the  OPEN/CLOSE button on the front

panel while pressing the  button to switch to a different frame/field

frequency. The frame/field frequency switches between 50 Hz and

60 Hz each time this operation is performed. The indicator for the

frame frequency’s current setting lights on the front panel display

(page 12).

 About Film material

The film material is a video signal with a frame rate of 24 frames/

second. For example, these materials include 1080/24p, 720/24p,

etc.

 To output film material

To output 1080/24p film material from the HDMI OUT terminal, set

the output video resolution to either Auto or Source Direct.

Caution

• 1080/24p signals can only be output from the HDMI OUT

terminal. They cannot be output from other video terminals.

•When Auto is selected, the picture is output at 60 frames/

second if your TV is not compatible with 1080/24p signals.

•When Source Direct is selected, the signals are output as such,

even if your TV is not compatible with 1080/24p signals. If the

picture is not displayed properly, use OUTPUT RESOLUTION to

set to the output video resolution at which the picture is properly

displayed.

• 720/24p video signals are output at 60 frames/second, even if

the resolution is set to Auto or Source Direct.

Auto





Output Video Resolution

Source : 1080/24p

Current Output :

1080/24p

Video resolution of the

currently playing disc

Output video resolution

from the player

Example:

51FD_WV_EN.book 25 ページ２００８年８月２６日　火曜日　午前９時５８分

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-51FD Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer BDP-51FD