Pioneer VSX-LX52 Manuel d'utilisateur Page 55
- Page / 116
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Listening to your system
06
55
En
Choosing the input signal
On this receiver, it is possible to switch the input signals
for the different inputs as described below.
1
• Press , then press
SIGNAL SEL
to select
the input signal corresponding to the source
component.
Each press cycles through the options as follows:
• AUTO – The receiver selects the first available signal
in the following order: HDMI; DIGITAL; ANALOG.
• ANALOG – Selects an analog signal.
• DIGITAL – Selects an optical or coaxial digital signal.
• HDMI – Selects an HDMI signal.
2
• PCM – For PCM input signals.
3
The receiver selects
the first available signal in the following order: HDMI;
DIGITAL.
When set to DIGITAL or AUTO, the indicators light
according to the signal being decoded, as follows:
– 2 DIGITAL lights with Dolby Digital decoding.
– 2 DIGITAL PLUS lights with Dolby Digital Plus
decoding.
– 2 TrueHD lights with Dolby TrueHD decoding.
– DTS lights with DTS decoding.
– DTS HD lights with DTS-HD decoding.
– MSTR lights with DTS-HD Master Audio decoding.
– 96/24 lights with DTS 96/24 decoding.
– WMA9 Pro lights to indicate that a WMA9 Pro signal
is being decoded.
• HDMI is not assigned by default. To select an HDMI
signal, conduct the input setup procedure (see The
Input Setup menu on page 40).
Better sound using Phase Control
This receiver’s Phase Control feature uses phase
correction measures to make sure your sound source
arrives at the listening position in phase, preventing
unwanted distor tion and/or coloring of the sound.
During multichannel playback, LFE (Low-Frequency
Effects) signals as well as low-frequency signals in each
channel are assigned to the subwoofer or other the
subwoofer and the most appropriate speaker. At least in
theory, however, this type of processing involves a group
delay that varies with frequency, resulting in phase
distortion where the low-frequency sound is delayed or
muffled by the conflict with other channels. With the
Phase Con
trol
mode switched on, this receiver can
reproduce powerful bass sound without deteriorating the
quality of the original sound (see illustration below).
Phase Control OFF
•Rhythms blurred and difficult to hear
• Bass sound with loss of depth
• Sound of musical instruments with no reality
Phase Control ON
• Rhythms with crystal-like clarity
• Bass sound with no loss of depth
• Sound of musical instruments with superb reality
Note
1 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats.
The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Master Audio, SACD and DVD Audio (including 192 kHz). With other digital signal formats, set to ANALOG (the
MULTI CH IN and TUNER).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital
connections (page 28) and set the signal input to DIGITAL.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your T
V
, not from this receiver.
3 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
123
SLEEP
HDMI OUT
MCACCSIGNAL SEL
456
DIMMERA.ATTSBch
789
CLASS
MASTER
CH LEVELD.ACCESS
0
ENTER
PHASE CTRLTHX STATUS
REMOTE
SETUP
TV/DTV
AUDIO
INFO
DISP
MPX PQLS
CH
RECEIVER
TV CTRL
RECEIVER
Front speaker
Subwoofer
Sound
source
Sound muffled due
to a delay in time
Listening
position
Front speaker
Subwoofer
Sound
source
Original sound
preserved with no
loss of clarity
Listening
position
VSX-LX52_SVYXJ.book 55 ページ ２００９年２月２６日 木曜日 午後４時３１分
- Operating Instructions 1
- IMPORTANT 2
- VENTILATION CAUTION 3
- Operating Environment 3
- Contents 4
- Before you start 7
- Controls and displays 10
- Front panel 11
- Connecting your equipment 14
- Placing the speakers 17
- Connecting the speakers 18
- About the 21
- audio connection 21
- About the video converter 22
- MULTI CH IN PRE O 28
- SPEAKERS 28
- CONTROL IR 28
- 12 V TRIGGER 28
- Connecting AM/FM antennas 30
- AUDIO IN 31
- VIDEO IN 31
- Connecting an IR receiver 33
- Connecting an HDMI-equipped 35
- Connecting an iPod 36
- Connecting a USB device 36
- Plugging in the receiver 37
- Basic Setup 38
- The Input Setup menu 40
- Basic playback 42
- Playing an iPod 43
- Playing a USB device 45
- Listening to the radio 48
- Listening to your system 50
- Listening in stereo 52
- Using Stream Direct 53
- Using surround back channel 53
- Setting the Up Mix function 54
- Selecting MCACC presets 54
- Choosing the input signal 55
- KURO LINK 57
- KURO LINK Setup 58
- Setting the PQLS function 59
- Before using synchronization 59
- Synchronized amp mode 59
- Using other functions 60
- Setting the Video options 61
- Switching the speaker system 63
- Using the MULTI-ZONE controls 63
- RECEIVER 65
- Resetting the system 66
- Controls the components 68
- The Advanced MCACC menu 71
- Automatic MCACC (Expert) 72
- Manual MCACC setup 74
- Checking MCACC Data 80
- Data Management 82
- Surround back speaker setting 85
- Speaker Setting 85
- Channel Level 86
- Speaker Distance 87
- THX Audio Setting 87
- The Other Setup menu 88
- Multi Channel Input Setup 89
- ZONE Audio Setup 89
- Power ON Level Setup 90
- Volume Limit Setup 90
- Remote Control Mode Setup 90
- Flicker Reduction Setup 90
- Troubleshooting 92
- Additional information 100
- Surround sound formats 100
- About iPod 101
- About THX 102
- About Neural – THX Surround 103
- Preset code list 105
- Satellite Set Top Box 110
- Cable/PVR Combination 112
- Specifications 113
- Cleaning the unit 113
- Our philosophy 113
- PIONEER CORPORATION 116
Produits connexes et manuels pour Récepteurs AV Pioneer VSX-LX52
(78 pages)
(20 pages)
(62 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.304 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels