Pioneer VSX-1022-K Manuel d'utilisateur télécharger pdf (Page 11)

Chapter

Connecting your equipment

Determining the speakers’ application

By connecting the left and right front speakers (L/R), the

center speaker (C), the left and right surround speakers (SL/

SR), the left and right surround back speakers (SBL/SBR) (or

the left and right front height speakers (FHL/FHR)), and the

subwoofer (SW), a surround sound system up to 7.1 channel

can be enjoyed.

The 5.1 channel surround system is the most commonly-used

in home theaters. To achieve the best possible surround

sound, install your speakers as shown below.

Important

•

VSX-1022 only: Both the surround back speakers and the

front height speakers can be connected at the same time.

In this case, sound will be output from either the front

height speaker or the surround back speaker depending on

which one was selected in the Speaker System setting

(see The Speaker System setting (VSX-1022 only)

page 49).

•

VSX-822 only: To connect the surround back or front

height speakers, an additional amplifier is required.

Connect the additional amplifier to the PRE OUT SURR

BACK/FRONT HEIGHT outputs of this unit and connect the

surround back or front height speakers to the additional

amplifier (see Connect the surround back or front height

speakers (In case of VSX-822) on page 12).

VSX-1022 only: Another way, you can use the speakers

connected to the B speaker terminals to listen to stereo

playback in another room. See Switching the speaker terminal

on page 14 for the listening options with this setup.

•

You will not be able to connect the B speakers if you

connect the front height speakers in the main zone.

Further, if you use the B speakers, a 5.1 ch playback will be

the maximum in the main zone. (No sound is output from

the surround back speaker.)

Some tips for improving sound quality

Where you put your speakers in the room has a big effect on

the quality of the sound. The following guidelines should help

you to get the best sound from your system.

•

It is best to angle the speakers towards the listening

position. The angle depends on the size of the room. Use

less of an angle for bigger rooms.

•

Refer to the chart below for placement of speakers you

intend to connect.

Place the surround speakers at 120º from the center. If

you, (1) use the surround back speaker, and, (2) don’t use

the front height speakers, we recommend placing the

surround speaker right beside you.

If you intend to connect only one surround back

speakers, place it directly behind you.

If the surround speakers cannot be set directly to the side

of the listening position with a 7.1-channel system, the

surround effect can be enhanced by turning off the Up

Mix function (see Setting the Up Mix function

on page 35).

•

For the best stereo effect, place the front speakers 2 m to

3 m apart, at equal distance from the TV.

•

If you’re using a center speaker, place the front speakers at

a wider angle. If not, place them at a narrower angle.

•

Place the center speaker above or below the TV so that the

sound of the center channel is localized at the TV screen.

Also, make sure the center speaker does not cross the line

formed by the leading edge of the front left and right

speakers.

5.1 channel surround

system:

6.1 channel surround

(Surround back) system:

FHL

FHR

SBL

SBR

7.1 channel surround

(Surround back) system:

7.1 channel surround

(Front height) system:

Main zone

Speaker B

FHL

SBL

SBR

FHR

30 30

120 120

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-1022-K Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSX-1022-K