Pioneer N-50 Manuel d'utilisateur télécharger pdf (Page 19)

Changing the settings

English

Français Español

Chapter 9:

Changing the settings

The factory default settings are indicated in italic.

1 Press

SETUP

to show the

Initial Setup

screen.

2Use

/

to select the setting, then press

ENTER

3 Follow the descriptions on the main display to change the setting.

Settings What it does

Display Setting

(Level3/Level2/

Level1

)

Dims or brightens the display.

Network Setting

Network Configuration

Network setting, see page 19.

Friendly Name

The name of this system displayed on a computer or other device connected to the

network can be changed.

Option Setting

BT PIN Select

(

0000

/1234/

8888

)

Use this to set up the

Bluetooth

PIN code. (page 13)

Internet Parental Lock

(Change Password/Internet

Parental Lock)

Restricts usage of internet radio using password. Select

Internet Parental Lock

Off

. (page 20)

You can set up the password from

Change Password

. (page 20)

Power Off Setting

(Auto Power Off/Quick Start

Mode)

Auto Power Off

, see page 20.

Quick Start Mode

, see page 20.

Language

(

English

Other languages

)

Change the language of the operation messages displayed on the main display.

Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese

Software Update

Use this to update this unit software.

System Info

Use this to check this unit information details.

Please check the following items:

LAN connection status, MAC Address, IP Address, Gateway Address, Proxy Server

setting, Subnet Mask. Also confirm that this unit’s software version (Release ID) is up to

date.

Reset

Use this procedure to reset all settings to the factory default.

Network setting

If a broadband router (with built-in DHCP server

function) is connected to this unit, you can simply turn

on the DHCP server function without having to set up the

network manually. A broadband router without a DHCP

server function connected to this unit must be set up as

described below. Before you set up the network, consult

with your ISP or the network manager for the required

settings.

It is advised that you also refer to the operation manual

supplied with your network component.

• Any changes made to a router without the DHCP

server function must be reflected to unit network

settings.

1 Press

SETUP

The Initial Setup screen is shown on the main display.

2 Select Network Setting



Network

Configuration

3Use

/

to select DHCP Off, then press

ENTER

The IP address setting screen is displayed.

4Use

///

or number buttons to

adjust the numbers, then press

ENTER

•Using / moves the adjusting digit.

•Using / increase or decrease the values.

Static IP Address

The IP address to be entered must be defined

within the following ranges. If the IP address

defined is beyond the following ranges, you cannot

play back audio files stored on components on the

network or listen to Internet radio stations.

Class A: 10.0.0.1 to 10.255.255.254 / Class B:

172.16.0.1 to 172.31.255.254 / Class C: 192.168.0.1

to 192.168.255.254

Subnet Mask

If an xDSL modem or a terminal adapter is directly

connected to this unit, enter the subnet mask listed

in your ISP documentation. In most of the cases,

enter 255.255.255.0.

Gateway address

In case a gateway (router) is connected to this unit,

enter the corresponding IP address.

Preferred DNS/Alternate DNS

If there is only one DNS server address listed in your

ISP documentation, enter Preferred DNS. In case

there are more than two DNS server addresses,

enter Alternate DNS in the other DNS server

address field.



Network Setting

Network Configuration

Friendly Name



Static IP Address

192

168 2 4

N-50-K_En.book 19 ページ２０１１年９月２１日　水曜日　午後９時１２分

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Pioneer N-50 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Non Pioneer N-50