Pioneer N-50 Manuel d'utilisateur télécharger pdf (Page 18)

Using other functions08

Chapter 8:

Using other functions

Using the Sound mode

N-50 only:

This function allows you to utilize various sound modes

during playback.

• This function cannot be used when the PURE

AUDIO mode is on.

• This function is effective only when playing analog

audio.

1 Press

SOUND

to show the Sound option

menu.

2Use

/

to select the setting, then

press

ENTER

3Use

/

to select

Off

, then press

ENTER

• The factory default settings are Off.

For greatest fidelity to the original

sound

N-50 only:

The PURE AUDIO mode allows audio signals to be

played via the shortest playback circuit without passing

through the DSP, thus reducing noise and producing

playback sound with greatest fidelity to the original.

1 Press

PURE AUDIO

to switch the Pure

Audio mode on or off.

Using the D/A converter

N-50 only:

Digital signals input to the rear-panel DIGITAL IN or

DIGITAL IN USB connectors are converted to analog

signals and output from the ANALOG OUT connectors.

Playing music from a digital audio

component

Outputs digital signals input to the DIGITAL IN

(COAXIAL or OPTICAL) connectors.

1 Make a digital input connection.

• See Digital audio input connections on page 6.

2 Press

DIG IN 1

DIG IN 2

to select

Digital In 1

Digital In 2

as the input

source.

You can also perform the same operation by pressing the

FUNCTION on the front panel repeatedly.

When Digital In 1 is selected, digital input signals from

the COAXIAL connector are played; when Digital In 2 is

selected, digital input signals from the OPTICAL

connector are played.

Note

• Digital signal formats that can be input to this unit

include linear PCM signals with sampling rates and

quantitative bits up to 192 kHz/24 bits (Depending

on the connected device and environment,

operation may not be successful).

Settings What it does

Auto

Sound

Retriever

With the

Auto Sound Retriever

function,

DSP processing is used to compensate for

the loss of audio data upon compression,

improving the sound

’

s sense of density and

modulation.

When On is selected, the

Auto Sound

Retriever

effect is optimized based on the

bitrate information of the contents input to

the

USB

Music Server

and

Internet Radio

to achieve high sound quality.

Auto Level

Control

In the Auto level control mode, this unit

equalizes playback sound levels.

Hi-bit 32

Creates a wider dynamic range with digital

sources. Smoother, more delicate musical

expression can be achieved by requantizing

16 bit to 24 bit audio signals to 32 bit.

Sound

Retriever

Air

Suitable for listening to the sound from a

Bluetooth wireless technology device. The

Sound Retriever Air

mode can only be

selected when the

BT Audio

Air Jam

input.

Playing music from a computer

Use this function to play digital audio input to the unit's

rear panel DIGITAL IN USB port.

1 Connect the unit to a computer via USB

cable

• See Using a USB cable to connect to a computer on

page 7.

2 Press

DIG IN USB

select

Digital In USB

the input source.

You can also perform the same operation by pressing the

FUNCTION on the front panel repeatedly.

3 Begin playback on the computer.

Note

• When using a USB cable to connect this unit to a

computer for playing music files, the following

linear PCM digital signals are supported:

Quantitative bits: 16 bit, 24 bit, 32 bit

Sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,

192 kHz

• Output from the DIGITAL OUT connectors is not

supported during Digital In USB input.

• Playback cannot be controlled from this unit during

use of this function; use your computer to control

playback.

• When disconnecting the USB cable, always stop

playback on the computer first.

• Sound may not be produced if your computer does

not support USB 2.0 HS.

• This unit does not support use of a USB hub.

Always use a USB cable to connect the unit directly

to the computer.

Important

• When using the DIGITAL IN USB port to input

audio files from a computer to this unit, it may be

necessary to install a special driver on the

computer. For details, see the website of Pioneer.

N-50-K_En.book 18 ページ２０１１年９月２１日　水曜日　午後９時１２分

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Pioneer N-50 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Non Pioneer N-50