Pioneer MILESTONE 12 Manuel d'utilisateur télécharger pdf (Page 113)

113

Menu Mode

6 Use the [2/3] buttons to adjust the click frequency.

In step 4, the left side was aligned while here the right

side is aligned.

1. With the [3] button, move the display until the mask

(black portion) protrudes into the right side of the image.

2. With the [2] button, move the display to the point

where the mask on the right side disappears.

7 In the adjustment in steps 5 and 6, the left side of the screen moves. With ‘POSITION’, accurately adjust the left

side of the video display again.

As in step 4, used the [2/3] buttons to align the left side.

8 In the adjustment in step 7, the right side of the screen moves. With ‘CLOCK’, adjust the right side again.

As in step 6, use the [2/3] buttons to align the left side.

Repeat steps 7 and 8 until the adjustment value converges, then adjust the ‘PHASE’.

There are vertical lines so it is easier to adjust the screen if a signal having edges is input.

9 Place the cursor on ‘PHASE’ then press the [SET] button.

0 Using the [2/3] buttons adjust the clock phase.

Move the vertical edge of the image to the point where it becomes bold.

Adjustment is now complete.

CLOCK

SET

EXIT

Screen 6

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 214 215

Pas de commentaire

Pioneer MILESTONE 12 Manuel d'utilisateur Page 113