Pioneer MILESTONE 12 Manuel d'utilisateur télécharger pdf (Page 103)

103

Menu Mode

5.3.4 Adjustment and setting in the Menu Mode

1) Power Management Setting

When no video signal (synchronizing signal) is detected, this function automatically sets the energy saving state to

save power.

• To disable the energy saving function, set to [OFF].

• When there is PC signal input:

To switch between the normal-operation state and the energy saving state is depended upon the presence of an

input signal, set ‘POWER MANAGEMENT’ to [ON].

Factory setting: OFF

Note

• To return from the energy saving state (by power management) to the normal operation state, operate the PC or

press the [INPUT] button on the remote control or main-control panel.

However, during SYNC ON G or composite SYNC input, operation does not return by simply operating the personal

computer. After operating the personal computer, press the [INPUT] button.

• The power consumption during power standby.

PDP-607CMX: 0.8 W

1 Select ‘SETUP‘.

2 Place the cursor over ‘POWER MANAGEMENT’ and

change the setting with the [SET] button.

Each time the [SET] button is pressed, the setting is

changed as shown below.

MENU INPUT1

CHANGE

SET

EXIT

SCREEN SETUP OPTION

POWER MGT. :OFF

SIGNAL FORMAT

PICTURE

3 OFF

ON 2

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 214 215

Pas de commentaire

Pioneer MILESTONE 12 Manuel d'utilisateur Page 103