Pioneer PRV-LX1 Instructions d'exploitation télécharger pdf (Page 49)

PRV-LX1

Other Functions

The Function Menu’s SET UP section =

[Operation] = [Video Settings] = [Test Signal]

command can be used to output a test pattern

signal. To turn off the test pattern, press the STOP

button or the FUNCTION button, or if a mouse is

connected, click both right and left buttons

simultaneously.

SET UP section = [Operation] = [Video Settings]

= [Test Signal]

Regarding Progressive Scan Output

This unit allows the output of progressive scan video

signals from the component output connector. To

turn progressive scan output ON/OFF, press the

controls on the front panel:

Press these buttons simultaneously.

Note 1:

Switching is not possible during disc playback.

Note 2:

Be sure the unit is connected to a television monitor

supporting progressive-scan. Proper image

reproduction will not be produced with other

monitors.

Note 3:

When progressive output is ON, image signals will

not be produced from output connectors other than

the component output connector.

Note 4:

Some progressive scan monitors currently available

do not possess complete compatibility with the PRV-

LX1, with the result that some image distortion may

occur. If such distortion is observed during

progressive scan playback, set the PRV-LX1’s output

to interlaced.

Playing Discs

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 88 89

Pas de commentaire

Pioneer PRV-LX1 Instructions d'exploitation Page 49