Pioneer BDP-160-K Manuel d'utilisateur télécharger pdf (Page 41)

• This unit supports USB flash drives formatted in

FAT32, FAT16 or NTFS. When formatting a USB flash

drive on your computer, do so with the settings below.

– File system: FAT32

– Allocation unit size: Default allocation size

• Only store the most recent update file on the USB

flash drive.

• Do not use a USB extension cable to connect a USB

flash drive to the player. Using a USB extension cable

may prevent the player from performing correctly.

1 Plug in the USB flash drive on which the update

file is stored.

2 When playback is stopped, display the Home

Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use / to select, then press ENTER.

4 Select and set Options  Update  USB Storage

 Start.

Use /// to select, then press ENTER.

5 Updating starts.

Press ENTER.

• Software updating may take a certain period of time.

• When updating is completed, the unit restarts

automatically.

Restoring all the settings to

the factory default settings

1 Check that the player’s power is turned on.

2 When playback is stopped, display the Home

Menu screen.

Press HOME MENU.

3 Select and set Initial Setup.

Use / to select, then press ENTER.

4 Select and set Options  Load Default  Next

Screen.

Use / to select, then press ENTER.

5 Select and set OK.

Use / to select, then press ENTER.

Note

• After restoring all the settings to the factory default

settings, use Setup Navigator to reset the player

(page 20).

Wireless network

connection

Wireless network setup

For the wireless network connection, the player needs to

be set up for network communication. This adjustment

can be done from the Setup menu. Adjust the NETWORK

setting as follow. Setting up the access point or the

wireless router is required before connecting the player to

the network.

 Preparation

Before setting the wireless network, you need to:

– set the access point or wireless router.

– note the SSID and security code of the network.

Note

• This unit conforms to the IEEE802.11b/g/n Wi-Fi

standards.

• Only 2.4 GHz is supported for the IEEE802.11n

standards.

1 Select Initial Setup  Network  Interface 

Wireless and press ENTER.

• When making the wireless setting for the first time,

Wireless Setting is displayed. Proceed to step 4.

• When already set to Wireless, proceed to step 2.

2 Select Initial Setup  Network  Wireless

Setting  Next Screen and press ENTER.

3 Select Yes and press ENTER to continue.

The new connection settings reset the current network

settings.

4 Wireless Setting menu is displayed.

Use / to select Scan. Then select Next using the /

and press ENTER.

5 The player scans the all available access points or

wireless routers within range and display them as a

list. Use / to select an access point or wireless

router on the list, and then press ENTER.

• If you have security on your access point or wireless

router, verify that the WEP or WPA key that was

entered into the player matches the routerís

information exactly. You need to input the security

code as necessary.

6 How to enter the security code.

1 Select the security code section using ///

and press ENTER to start the software keyboard.

2Use /// to select characters and items, and

then press ENTER to input.

3 Select abc, ABC, or !@#$ using /// to

switch to lower case characters, upper case characters,

or symbols.

BDP-160_EN_ASEAN.book 41 ページ２０１３年７月１７日　水曜日　午後４時１２分

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-160-K Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer BDP-160-K