Pioneer BDP-160-K Manuel d'utilisateur télécharger pdf (Page 31)

Connecting by Wi-Fi

Direct

About Wi-Fi

The Wi-Fi CERTIFIED Logo is a certification mark of the

Wi-Fi Alliance.

The Wi-Fi Protected Setup Identifier Mark is a mark of the

Wi-Fi Alliance.

Wi-Fi, Wi-Fi Protected Setup, Wi-Fi Direct, WPA, WPA2

are marks of the Wi-Fi Alliance.

Using the Wi-Fi Direct

function

Wi-Fi Direct is a function for connecting this unit and a

DLNA-compatible mobile device without using a wireless

LAN router. It allows you to play the photos, music and

video files stored on your mobile device on this unit.

Note

• Only one mobile device can be connected by Wi-Fi

Direct at a time.

• To connect with a different mobile device, you must

first cancel the connection of the currently connected

mobile device.

• The Internet connection cannot be used while

connected by Wi-Fi Direct.

• When this unit’s power is turned off (set to standby),

the Wi-Fi Direct function is canceled and the network

settings set before using Wi-Fi Direct are restored.

• The unit does not support mobile device control using

a specialist application.

• In order to use this function your mobile device must

meet Wi-Fi specifications.

Displaying the Wi-Fi Direct

mode screen

1 Turn on the TV's power.

2 Press POWER to turn this unit's power on.

The Pioneer logo appears on the TV screen.

Note

• If the Pioneer logo is not displayed, check the

following:

– If this unit is in the play mode, press  STOP.

– Once playback stops, press  STOP again to

cancel Continued Viewing Playback.

– If the home media gallery or home menu is

displayed, press HOME MENU to close the

displayed screen.

3 While the Pioneer logo is displayed, press  to

display the Wi-Fi Direct mode screen.

• The Wi-Fi Direct connection settings are made at this

screen.

• This screen remains displayed while connected in Wi-

Fi Direct.

• When this screen is closed, the Wi-Fi Direct

connection is canceled.

Connecting with the mobile

device

Normally connect using the procedure below.

1 Display the Wi-Fi Direct mode screen.

2 At the Wi-Fi network settings on your mobile

device, select this unit's device name, as displayed on

the TV screen ("DIRECT-xxBD").

“xx” indicates the device’s identification number.

Caution

• If the name of the unit “DIRECT-xxBD” does not

appear on your mobile device, press RETURN on

the remote control and then

 and perform the

controls again from the Wi-Fi Direct Mode Screen.

3 On your mobile device, input this unit's

password, as displayed on the TV screen.

This completes the connection.

Note

• For instructions on operating your mobile devices,

see their respective operating instructions.

Connecting by WPS

If your mobile device supports WPS (by push-button

method), it can be connected.

1 Display the Wi-Fi Direct mode screen.

2Use / to select WPS, then press ENTER.

3Use / to select Next, then press ENTER.

4 Within 2 minutes, turn on the mobile device’s

WPS setting.

Once the connection is completed, [Connection Success]

appears on the TV screen.

Note

• For instructions on operating your mobile devices,

see their respective operating instructions.

BDP-160_EN_ASEAN.book 31 ページ２０１３年７月１７日　水曜日　午後４時１２分

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-160-K Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer BDP-160-K