Pioneer DVR-560HX-S Instructions d'exploitation télécharger pdf (Page 57)

Using the digital electronic programme guide

57

En

06

3 Press  then select ‘Modify’

from the command menu panel.

Alternatively, press ENTER.

The Timer Programme Set screen appears

from which you can edit the settings.

4 Enter the timer recording

settings.

Use the / buttons to select a field; use

the / buttons to change the value. For

more information on the options available at

the Timer Programme Set screen, see

Setting timer programmes on page 54.

5 After entering all the timer

recording information, highlight ‘Store

Programme’ and press ENTER.

The timer recording list screen is displayed

again. The timer programme you just input

appears in the list. The rightmost column

shows various timer recording status

messages:

• OK – Can

be recorded.

• Time Over – Not enough space on the

HDD (the recording won’t finish).

• Over 12h – Recording time of over

12 hours set (when recording to the HDD

the recording will be split into two titles).

• Overlap – Two timer programmes

partially or completely overlap. The one

starting earlier will take priority.

• Until ... (eg., Until 13/8) – For a regular

recording, the last programme that

could be recorded is shown.

• Data Over – Can’t record because the

disc management area

of the disc is full.

• Cancel Once – A regular timer

programme is set to skip.

• Can’t Rec – Not possible to record.

• Title Over – Can’t record because there

is already the maximum number of titles

on the disc (HDD: 999; DVD: 99).

• Recording – The programme is currently

recording.

• Standby – The recorder is in timer

recording standby.

• Valid Until ... (eg., Valid Until 13/8) (UK

only) – When you have set to make a

series recording of a programme that

has no new scheduled broadcasts, the

date displayed indicates the last day

until which the scheduled programme

settings remain valid. (If the programm

e

is not broadcast for over 13 weeks, its

settings are automatically deleted.)

• No Broadcast (UK only) – Displays when

a programme for which you had the EPG

Link set to On does not record because

the date of the scheduled recording has

already passed.

• nothing displayed – Another timer

recording or copying is in progress.

6 Press to exit the timer recording

screen.

Note

• If you set a DVD timer recording but

there is no recordable DVD disc loaded,

or the disc loaded doesn’t have enough

free space for the complete recording,

Reco

very is shown. In this case (unless

you load a suitable disc before the

recording actually starts), the recorder

will use the HDD for recording. (The

message Can’t Rec will appear if there

are already 999 titles on the HDD or if

there is not enough free space on the

HDD for recording.)

• When you have EPG Link or Series

Recording set to On, any changes in

broadcast time or division of broadcasts

are automatically accommodated for

and your scheduled recordings are

carried out without any additional

settings. As a result, even when you have

not scheduled programmes to record at

the same time, changes in broa

dcasting

schedules can cause scheduled

recordings to overlap.

ENTER

ENTER

ENTER

HOME

MENU

DVR560HX_WV_EN.book 57 ページ２００８年２月２２日　金曜日　午後７時２６分

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 173 174

Commentaires sur ces manuels

Pas de commentaire