Pioneer DVR-433H-K Manuel d'utilisateur Page 40
- Page / 119
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Recording
05
40
En
4 Use the AUDIO (SHIFT + 1) button to select the
audio channel to record.
See
Changing audio channels
on page 29 for more on
this.
• When recording in VR mode, if a broadcast is
bilingual, both audio channels are recorded, allowing
you to switch the audio channel on playback. The
only exception to this is when the picture quality is set
to
LPCM
, in which case you do need to select the
audio channel before recording.
5 Press
REC to start recording.
If you want to set a recording end time, press the
REC
button repeatedly. The recording time increases in 30
minute increments, up to a maximum of six hours. The
time the recording will end is shown on-screen and in the
front panel display. When the recording ends, the
recorder automatically switches into standby if no other
operation is being performed.
• To cancel the set recording time, press
REC
.
• If you want to pause recording at any time, press
. Press again to restart the recording. (If recording
to the HDD or in VR mode, a new chapter is started
after recording restarts)
6 To stop the recording, press
STOP REC.
• If you set the recording time in the previous step, you
can still stop the recording anytime by pressing
STOP REC
.
• Recording will stop automatically when there is no
more space on the HDD/DVD, or after 12 hours of
HDD recording (whichever is sooner).
Tip
• During recording you can turn on/off the SCART loop
through function. During recording, press the front
panel
button to switch to
SCART THRU
(loop
through on), or
to switch to
SCART NORM
(loop
though off). Note that you can’t switch loop through
on if recording from the
AV2/AUTO START
REC(INPUT 1/DECODER)
or
AV1(RGB)-TV
connectors. Also, loop through is automatically reset
to off after recording has finished.
Direct recording from TV
If you connected this recorder to your TV using a SCART
cable, and your TV supports Direct Recording, you can
record whatever is currently being shown on the TV
without having to worry about what channel preset the
recorder is on. Check the instructions that came with
your TV if you’re not sure whether your TV supports this
feature.
1 If necessary, load a recordable disc.
2 Set the picture quality/recording time using the
REC MODE (SHIFT +
) button.
3 Press TV DIRECT REC (SHIFT +
REC) to start
recording.
If you want to set a recording time, press the
REC
button repeatedly. The recording time increases in 30
minute increments, up to a maximum of six hours. You
can see the recording time on-screen and in the front
panel display. When the recording ends, the recorder
automatically switches into standby if no other operation
is being performed.
• To cancel the set recording time, press
REC
.
• If you want to pause recording at any time, press
. Press again to restart the recording. (If recording
to the HDD or in VR mode, a new chapter is started
after recording restarts)
4 To stop the recording, press
STOP REC.
• If you set the recording time in step
3
, you can still
stop the recording anytime by pressing
STOP REC
.
• Recording will stop automatically when there is no
more space on the HDD/DVD, or after 12 hours of
HDD recording (whichever is sooner).
Tip
• You can press
TV DIRECT REC
(
SHIFT
+
REC
)
while the recorder is in standby to switch on and
immediately start recording.
• Please note that you can’t record from another
component (VCR, etc.) that is connected by a SCART
cable to the
AV2/AUTO START REC(INPUT 1/
DECODER)
connector using the TV Direct Recording
feature.
DVD RECORDER
SKIP
TV DRECT REC
REC MODE
ST0P REC
REC
SHIFT
ONE TOUCH
COPY
BACK CM
DVR-433H_UK.book 40 ページ ２００５年３月１日 火曜日 午後５時６分
- DVR-433H-S 1
- DVR-433H-K 1
- IMPORTANT 2
- Contents 4
- 11 The Disc Setup menu 5
- 13 The Initial Setup menu 5
- 14 Additional information 5
- Playable Recordable 9
- Before you start 10
- Connecting up 12
- Extra features for use with 13
- Easy connections 14
- Connecting other AV sources 20
- Plugging in 20
- Controls and displays 21
- Remote control 22
- Getting started 25
- Making your first recording 28
- Using the built-in TV tuner 29
- Basic playback 31
- Using the Home Menu 34
- Recording 37
- Recorded audio 38
- Basic recording from the TV 39
- Setting a timer recording 41
- HDD Remain 44
- DVD Remain 44
- 59h59m(SP) 44
- 1h59m(SP) 44
- Tmr Pgms 4/32 44
- Timer recording FAQ 47
- DVD RECORDER 48
- Recording from a DV camcorder 50
- Initializing Disc 52
- 1 min left 52
- Playback 53
- Scanning discs 56
- Playing in slow motion 56
- Frame advance/frame reverse 57
- The Play Mode menu 57
- Subtitle: 1/2 English 60
- Switching DVD soundtracks 61
- Switching audio channels 61
- Switching camera angles 62
- Copying and back-up 63
- Using Copy Lists 64
- Using disc back-up 71
- Chapter 8 73
- The Disc Navigator screen 73
- Command menu panel options 74
- Editing accuracy 74
- HDD genres 74
- Title Name 75
- Set Thumbnail 76
- Erase Section 77
- Chapter Edit 78
- Set Genre 79
- Genre Name 80
- Multi-Mode 80
- No title 81
- Using the Jukebox 82
- Editing Jukebox albums 83
- The PhotoViewer 85
- The Disc Setup menu 87
- Finalize settings 88
- Optimize HDD 88
- Initialize HDD 88
- The Video/Audio Adjust menu 89
- Audio DRC 91
- The Initial Setup menu 100
- Additional information 101
- Minimum copying times 102
- Troubleshooting 103
- Frequently asked questions 105
- About DV 106
- Manual recording modes 107
- Language code list 108
- Country/Area code list 108
- Storing discs 111
- Damaged discs 111
- Hints on installation 112
- Glossary 113
- Specifications 115
- PIONEER CORPORATION 119
Produits connexes et manuels pour Lecteurs de DVD Pioneer DVR-433H-K
(107 pages)
(208 pages)
(17 pages)
(103 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.346 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels