Pioneer DV-LX50 Manuel d'utilisateur Page 14
- Page / 94
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
02
14
En
Connecting using HDMI
If you have a HDMI equipped monitor or display, you can connect it
to this player using a commercially available HDMI cable.
The HDMI connector outputs uncompressed digital video, as well as
almost every kind of digital audio that the player is compatible with,
including DVD-Video, DVD-Audio (see below for limitations), SACD,
Video CD/Super VCD, CD, WMA, MP3, MPEG-4 AAC, DivX video and
WMV.
• Use an HDMI cable (not supplied) to connect the HDMI OUT
interconnect on this player to an HDMI interconnect on a
HDMI-compatible display.
The arrow on the cable connector body should be face up for correct
alignment with the connector on the player.
Note
• This unit has been designed to be compliant with HDMI (High-
Definition Multimedia Interface). Depending on the component
you have connected, using a DVI connection may result in
unreliable signal transfers.
• When you change the component connected to the HDMI
output, you will also need to change the HDMI settings to match
the new component (see HDMI Out on page 32, Resolution
(Max) and HDMI Color on page 33 to do this). However, the
settings for each component are then stored in memory (for up
to 2 components).
• The HDMI connection is compatible with 2 channel linear PCM
signals (44.1 kHz to 192 kHz, 16 bit/20 bit/24 bit), and Dolby
Digital, DTS, MPEG audio bitstream, multi channel DSD, and
multi channel linear PCM signals, (5.1 channel signals up to
96 kHz, 16 bit/20 bit/24 bit).
• Depending on the HDMI cable being used, 1080p output may
not appear correctly.
About HDMI
HDMI (High-Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed to
provide the technologies of High-bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specification. HDCP is used to protect digital content transmitted
and received by DVI-compliant displays.
HDMI has the capability to support standard, enhanced, or high-
definition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to five gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
About HDMI Control
You can enable HDMI Control by turning the HDMI Control setting
to On for all components connected via HDMI cable. Check the
video output from this unit once you have completed making
connections and settings for all components. You will need to check
the video output each time you change connected components or
remove the HDMI cable.
Note that HDMI Control may not operate properly if you do not use
an HDMI cable that supports the HDMI 1.3 specification
(Category 2) or later.
To HDMI interconnect
HDMI-compatible display
DVLX50_WY_EN.book 14 ページ ２００７年８月３０日 木曜日 午前１１時１９分
- DVD Player 1
- Lettore DVD 1
- IMPORTANT 2
- POWER-CORD CAUTION 3
- VENTILATION CAUTION 3
- Contents 4
- Before you start 5
- What’s in the box 6
- Hints on installation 6
- About DualDisc playback 7
- CD-R/-RW compatibility 7
- DVD+R/+RW compatibility 7
- DVD-R/-RW compatibility 7
- Connections 9
- Easy connections 10
- Connecting to an AV receiver 12
- Connecting the digital output 13
- Connecting using HDMI 14
- Controls and displays 16
- Remote control 18
- Getting started 20
- Using the on-screen displays 21
- Playing discs 22
- Resume and Last Memory 23
- DVD-Video and DivX disc menus 23
- Video CD/Super VCD PBC menus 23
- Looping a section of a disc 27
- Using repeat play 27
- Using random play 28
- Creating a program list 28
- Searching a disc 29
- Switching subtitles 29
- Zooming the screen 29
- Switching camera angles 30
- Displaying disc information 30
- Chapter 6 31
- Audio Settings menu 31
- Video Adjust menu 31
- Initial Settings menu 32
- Video Output settings 33
- Language settings 33
- Display settings 34
- Options settings 34
- Speakers settings 34
- Parental Lock 35
- DTS Downmix 35
- About DivX 36
- VOD content 36
- Audio Output Mode 36
- Speaker Distance 39
- Speaker Installation 39
- Additional information 40
- Standard TV users 41
- Troubleshooting 42
- HDMI troubleshooting 44
- Glossary 45
- Language code list 46
- Country/Area code list 46
- Specifications 47
- IMPORTANTE 48
- Italiano 49
- Informazioni preliminari 51
- Contenuto della confezione 52
- Consigli per l’installazione 52
- Uniti ed in altri Paesi 54
- Collegamenti 55
- Collegamenti facili 56
- Ricevitore AV 58
- Agli ingressi audio 58
- Agli ingressi video 58
- Collegamento tramite HDMI 60
- Comandi e display 62
- Telecomando 64
- Predisposizione 66
- Riproduzione di dischi 68
- Tasto A cosa serve 74
- Menu Initial Settings 78
- Impostazioni Display 80
- Impostazioni Options 80
- Impostazioni Speakers 80
- Informazioni supplementari 86
- Risoluzione dei problemi 88
- Elenco codici Paese/area 92
- PIONEER CORPORATION 94
Produits connexes et manuels pour Lecteurs de DVD Pioneer DV-LX50
(103 pages)
(94 pages)
(12 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.391 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels