Pioneer DV-696AV-K Manuel d'utilisateur télécharger pdf (Page 12)

Connecting up02

12

En

1 Connect the VIDEO OUT and AUDIO

OUT 5.1ch L/R jacks to a set of A/V inputs

on your TV.

Use the supplied audio/video cable,

connecting the red and white plugs to the

audio outputs and the yellow plug to the video

output. Make sure you match up the left and

right audio outputs with their corresponding

inputs for correct stereo sound.

See below if you want to use a component or

S-video cable for the video connection.

2 Connect the supplied AC power cable to

the AC IN inlet, then plug into a power

outlet.

Note

• Before unplugging the player from the

power outlet, make sure you first switch it

into standby using either the front panel



STANDBY/ON

button, or the remote

control, and wait of the

-OFF-

message to

disappear from the player’s display.

• For the above reasons, do not plug this

player into a switched power supply found

on some amplifiers and AV receivers.

Connecting using a SCART AV

cable

A SCART-type AV connector is provided for

connection to a TV or AV receiver. The video

output is switchable between ordinary

composite, S-video and RGB. See

AV Connector

Out

on page 40 for how to set it.

The SCART AV connector also outputs analog

audio, so there is no need to also connect the

AUDIO OUT L/R

jacks.

1 Use a SCART cable (not supplied) to

connect the AV CONNECTOR (RGB) output

to a SCART AV input on your TV (or AV

receiver).

COAXIAL

AUDIO OUT

OPTICAL

DIGITAL

AC IN

AV CONN ECTOR (RGB) TV/AV Receiver

TV

SCART

DV696AV_WY_EN.book 12 ページ２００６年４月７日　金曜日　午後６時４８分

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 127 128

Commentaires sur ces manuels

Pas de commentaire