Pioneer AVH-P8400BT Manuel d'utilisateur télécharger pdf (Page 56)

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 46.

2 Touch Time Alignment and then touch

Adjustment.

# Adjustment can only be selected when either

Front-L or Front-R is selected in Position.

3 Touch a or b to select the speaker to

be adjusted.

Front-L (left front speaker)—Center (center

speaker)—Front-R (right front speaker)—

Rear-R (right rear speaker)—Rear-L (left rear

speaker)—Subwoofer (subwoofer)

# Speakers with the size set to Off cannot be se-

lected. (Refer to Setting the speaker setting on

page 53.)

4 Touch c or d to adjust the distance be-

tween the selected speaker and the listen-

ing position.

Range: 0.0cm to 500.0cm

Using the equalizer

You can adjust the equalization to match the

car’s interior acoustic characteristics as de-

sired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Flat Flat

Custom1 Custom 1

Custom2 Custom 2

S.Bass Super bass

! The equalizer curves for Custom1 and

Custom2 can be adjusted.

! When Flat, no changes are made to the

sound. You can check the effects of the

equalizer curves by switching alternatively

between Flat and another equalizer curve.

! When Digital Direct is on, the equalizer

curve is fixed to Flat.

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 46.

2 Touch Parametric EQ.

3 Touch a or b to select the EQ (equali-

zer).

4 Touch d to select the equalizer.

Powerful—Natural—Vocal—Flat— Custom1

—Custom2—S.Bass

Adjusting the 3-band parametric

equalizer

For Custom1 and Custom2 equalizer curves,

you can adjust the front, rear and center

equalizer curves separately by selecting a cen-

ter frequency, an equalizer level and a Q factor

for each band.

! A separate Custom1 curve can be created

for each source.

! A Custom2 curve that is common for all

sources can be created.

! The center speaker largely determines the

sound image and getting the balance right

is not easy. We recommend that you first

adjust the balance among all of the speak-

ers except the center speaker, by playing 2-

channel audio (a CD, for example). Then,

play 5.1-channel audio (Dolby Digital or

DTS) and adjust the center speaker output

to match the balance already created

among the other speakers.

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 46.

En

56

Section

13

Menu operations

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 119 120

Commentaires sur ces manuels

Pas de commentaire