Pioneer DEH-X8600BT Manuel d'utilisateur télécharger pdf (Page 17)

Black plate (17,1)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, Not found is displayed.

2 Turn M.C. to select a device from the device list.

! If the desired device is not displayed, select

RE-SEARCH.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit). Enter the PIN code

on your device if necessary.

! PIN code is set to 0000 as the default. You

can change this code.

! A 6-digit number may display on both this unit

and the Bluetooth device.

Select yes if the 6-digit numbers displayed on

this unit and the Bluetooth device are the

same.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

Auto connect (connecting to a Bluetooth device

automatically)

1 Press M.C. to turn automatic connection on or

off.

Visibility (setting the visibility of this unit)

Bluetooth visibility can be turned on so that other de-

vices can discover the unit.

1 Press M.C. to turn the visibility of this unit on or

off.

Pin code input (PIN code input)

You must enter a PIN code on your device to confirm

the Bluetooth connection. The d efault code is 0000,

but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you to

the PIN code input display, and you can

change the PIN code.

Device INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the desired setting.

Device name—Bluetooth device address

Guest Mod e (guest mode)

When this mode is turned on, if a pairing is attempted

while there are already three devices paired together,

the unit will move to the Delete device screen auto-

matically and prompt you to delete a device. For de-

tails, refer to Delete device (deleting a device from the

device list) on page 16.

1 Press M.C. to turn the guest mode on or off.

Auto pairing (auto pairing)

If this function is turned on while there is an iPhone

connected to the unit by USB, you will be automati-

cally prompted to pair the unit and iPhone.

1 Press M.C. to turn auto pairing on or off.

! This function may not be available depending on

what version of iOS you are using.

! This function cannot be used with USB port 2.

Phone menu operation

1 Press to display the phone menu.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

Missed calls (missed call history)

Dialled calls (dialed call history)

Received calls (received call history)

1 Press M.C. to display the phone number list.

2 Turn M.C. to select a name or phone number.

3 Press M.C. to make a ca ll.

! To display details about the contact you selected,

press and hold M.C.

<QRB3358-A>17

Section

Using this unit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Pioneer DEH-X8600BT Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia automobile Pioneer DEH-X8600BT