Pioneer AVIC-X1 Manuel d'utilisateur télécharger pdf (Page 86)

84

Chapter 8

Customising the Audio Source Setting AV

2 Touch 



or 



to adjust front/rear speaker

balance.

Each time you touch 



or 



moves the front/

rear speaker balance towards the front or the

rear.

FRONT:15 — REAR:15 is displayed as the

front/rear speaker balance moves from front

to rear.

FR:00 is the proper setting when only two

speakers are used.

When the rear output setting is REAR SP

SUB. W, you cannot adjust front/rear speaker

balance.

➲ Setting the rear output and subwoofer con-

troller ➞ Page 89

3 Touch 



or 



to adjust left/right speaker

balance.

Each time you touch 



or 



moves the left/

right speaker balance towards the left or the

right.

LEFT:09 — RIGHT:09 is displayed as the

left/right speaker balance moves from left to

right.

Adjusting equaliser curves

You can adjust the currently selected equaliser

curve setting as desired. Adjusted equaliser

curve settings are memorised in CUSTOM.

• You can adjust the centre frequency, level and

the Q factor (curve characteristics) of each

currently selected curve band (LOW/MID/

HIGH).

• BAND:

You can select the equaliser band.

• LEVEL:

You can select the decibel (dB) level of the

selected EQ.

• FREQUENCY:

You can select which frequency to be set as

the centre frequency.

•Q FACTOR:

You can select the details of the curve charac-

teristics.

1 Touch “EQ MENU” in the AUDIO menu.

2 Touch 



or 



to select the equaliser band

to adjust.

Each time you touch 



or 



selects equaliser

bands in the following order:

LOW (low) — MID (mid) — HIGH (high)

3 Touch “+” or “–” to adjust the level of the

equaliser band.

Each time you touch “+” or “–” increases or

decreases the level of the equalisation band.

+6— –6 is displayed as the level is increased

or decreased.

4 Touch 



or 



to select the desired fre-

quency.

Touch 



or 



until the desired frequency

appears in the display.

Low: 40 — 80 — 100 — 160 (Hz)

Mid: 200 — 500 — 1k — 2k (Hz)

High: 3.15k — 8k — 10k — 12.5k (Hz)

5 Touch 



or 



to select the desired Q fac-

tor.

Touch 



or 



until the desired Q factor

appears in the display.

2WIDE — 1WIDE — 1NARROW —

2NARROW

❒ If you make adjustments, CUSTOM curve

is updated.

Adjusting bass and treble

Use this function to adjust the bass and treble.

The ability to select the frequency as well as the

level gives you good control over the tonal bal-

ance of the audio.

The bass and treble adjust screens allow you to

reduce or boost frequencies in the following area;

Bass: 40, 63, 100, 160 (Hz)

Treble: 2.5K, 4K, 6.3K, 10K (Hz)

• If EQ-EX is turned on and CUSTOM is

selected as the equaliser curve, you can adjust

bass and treble settings.

➲ Compensating for equaliser curves (EQ-EX)

➞ Page 86

Audio Adjustments

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 124 125

Commentaires sur ces manuels

Pas de commentaire