Pioneer AVH-X2500BT Manuel d'utilisateur télécharger pdf (Page 72)

Adjusting the response

positions of the touch panels

(Touch Panel Calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel. There are two ad-

justment methods: 4-point adjustment, in

which you touch four corners of the screen;

and 16-point adjustment, in which you make

fine-adjustments on the entire screen.

! Park your car in a safe place and use this

function. Do not operate it while driving.

! Touch the screen gently for adjustment.

Forcefully pressing the touch panel may da-

mage the touch panel. Do not use a sharp

pointed tool such as a ballpoint pen or me-

chanical pen. Doing so may damage the

screen.

! If the touch panel cannot be adjusted prop-

erly, consult your local Pioneer dealer.

1 Turn the source off.

Refer to Turning the source ON/OFF on page

10.

2 Press and hold the home button to

start Touch Panel Calibration.

The 4-point touch panel adjustment screen ap-

pears. When 2-point appears at once, touch

both.

3 Touch each of the arrows on the four

corners of the screen.

# To cancel the adjustment, press and hold the

home button.

4 Press the home button to complete 4-

point adjustment.

Data for the adjusted position is saved.

# Do not turn off the engine while the data is

being saved.

5 Press the home button to proceed to

16-point adjustment.

The 16-point touch panel adjustment screen

appears.

# To cancel the adjustment, press and hold the

home button.

6 Gently touch the center of the + mark

displayed on the screen.

After you touch all the marks, the data for the

adjusted position is saved.

# Do not turn off the engine while the data is

being saved.

7 Press and hold the home button to

complete the adjustment.

Using an AUX source

An auxiliary device or portable device sold se-

parately can be connected to this unit.

About AUX connection methods

You can connect auxiliary devices to this unit.

Mini pin plug cable (AUX )

When connecting an auxiliary device using a

mini plug cable

iPods and portable audio/video players can be

connected to this unit via mini plug cable.

! If an iPod with video capabilities is con-

nected to this unit via 3.5 mm plug (4 pole)

cable (such as the CD-V150M), you can

enjoy the video contents of the connected

iPod.

! A portable audio/video player can be con-

nected by using a 3.5 mm plug (4 pole) with

an RCA cable (sold separately). However,

depending on the cable, a reverse connec-

tion between the red (right side audio)

cable and yellow (video) cable may be re-

quired in order for the sound and video

image to be reproduced correctly.

% Insert the stereo mini plug into the

AUX input jack on this unit.

For more details, refer to the installation man-

ual.

En

72

Section

22

Other functions

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 95 96

Commentaires sur ces manuels

Pas de commentaire