Pioneer AVH-X2500BT Manuel d'utilisateur télécharger pdf (Page 54)

3 Touch c or d to select a desired level

for loudness.

Off (off)—Low (low)—Mid (mid)—High

(high)

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

! The cut-off frequency and output level can

be adjusted when the subwoofer output is

on.

1 Press the home button to switch to the

home display.

2 Touch the audio function key to open

the audio menu.

3 Touch Subwoofer on the audio function

menu.

4 Touch On or Off next to Subwoofer to

turn the subwoofer output on or off.

5 Touch Normal or Reverse next to Phase

to select the phase of subwoofer output.

6 Touch c or d next to Level to adjust

the output level of the subwoofer.

Range: +6 to –24

7 Touch c or d next to Frequency to se-

lect the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-

lected range are outputted from the sub-

woofer.

Boosting the bass

You can boost the bass level.

1 Press the home button to switch to the

home display.

2 Touch the audio function key to open

the audio menu.

3 Touch c or d to select a desired level.

Range: 0 to +6

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

1 Press the home button to switch to the

home display.

2 Touch the audio function key to open

the audio menu.

3 Touch c or d next to the frequency to

select cut-off frequency.

Off (off)—50Hz—63Hz—80Hz—100Hz—

125Hz

Only frequencies higher than those in the se-

lected range are output from the front or rear

speakers.

Adjusting source levels

With SLA (source level adjustment), the vo-

lume levels of each source can be adjusted to

prevent significant differences between

sources.

! Settings are based on the FM volume level,

which remains unchanged.

1 Press the home button to switch to the

home display.

2 Touch the audio function key to open

the audio menu.

3 Compare the FM volume level with the

level of the source you wish to adjust.

4 Touch Source Level Adjuster on the

audio function menu.

En

54

Section

16

Audio adjustments

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Commentaires sur ces manuels

Pas de commentaire