Pioneer DVH-P5900MP Manuel d'utilisateur télécharger pdf (Page 78)

Note

To adjust the speaker output levels in this mode is

the same as making the speaker output levels at

TEST TONE. Both provide the same results.

Adjusting the speaker output

levels using a test tone

This function allows you to easily get the over-

all balance right among the speakers.

1 Press AUDIO and hold until FRONT ap-

pears in the display, then press AUDIO to

select TEST TONE.

2 Press d to start the test tone output.

The test tone is outputted. It rotates from

speaker to speaker in the following sequence

at intervals of about two seconds. The current

settings for the speaker over which you hear

the test tone are shown in the display.

FRT-L (front speaker left)—CENTER (center

speaker)—FRT-R (front speaker right)—

REAR-R (rear speaker right)—REAR-L (rear

speaker left)—SUB.W (subwoofer)

# Check each speaker output level. If no adjust-

ments are needed, perform step 4 to stop the test

tone.

# The settings do not appear for speakers

whose size is set OFF. (Refer to Setting the speak-

er setting on page 76.)

3 Press a or b to adjust the speaker out-

put level.

Each press of a or b increases or decreases

the speaker output level. +10 to –10 is dis-

played as the level is increased or decreased.

# The test tone rotates to the next speaker after

about two seconds from the last operation.

4 Press c to stop the test tone output.

5 Press BAND to return to the playback

display.

Notes

! If needed, select speakers and adjust their ‘ab-

solute’ output levels. (Refer to Adjusting the

speaker output levels on the previous page.)

! To adjust the speaker output levels in this

mode is the same as making the speaker out-

put levels at FRT-L. Both provide the same re-

sults.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

1 Press AUDIO and hold until AT EQ ap-

pears in the display, then press AUDIO to

select TA.

2 Press c or d to select the time align-

ment.

! TA INTIAL – Initial time alignment (factory

setting)

! TA CUSTOM – Adjusted time alignment

that you can create for yourself

! TA AUTO TA – Time alignment created by

auto TA and EQ. (Refer to Auto TA and EQ

(auto-time alignment and auto-equalizing)

on page 73.)

! TA OFF – Turn the time alignment off

# If auto TA and EQ have not been carried out,

SET A.TA is displayed when TA AUTO TA is se-

lected.

3 Press BAND to cancel the time align-

ment mode.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

Available accessori es

Section

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Pioneer DVH-P5900MP Manuel d'utilisateur Page 78

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs de médias en voiture Pioneer DVH-P5900MP