Pioneer DEH-P7850BT Manuel d'utilisateur télécharger pdf (Page 71)

Black plate (71,1)

Introduction of audio

adjustments

1

1

1

1 Audio display

Shows the audio adjustment status.

1 Press MULTI-CONTROL to display the

main menu.

FUNCTION, AUDIO and ENTERTAINMENT

appear on the display.

2 Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option; press to se-

lect.

The audio function name appears on the dis-

play.

3 Turn MULTI-CONTROL to select the

audio function.

Turn MULTI-CONTROL clockwise or counter-

clockwise to switch between the audio func-

tions in the following order:

Fader (balance adjustment)—PWRFL (graphic

equalizer adjustment)—50Hz (7-band graphic

equalizer adjustment)—LOUD (loudness)—

Sub W.1 (subwoofer on/off setting)—Sub W.2

(subwoofer setting)—Bass (bass boost)—HPF

(high pass filter)—SLA (source level adjust-

ment)

# You can also switch between the audio func-

tions in reverse order by turning

MULTI-CONTROL counterclockwise.

# You can select the Sub W.2 only when sub-

woofer output is turned on in Sub W.1.

# When selecting the FM tuner as the source,

you cannot switch to SLA.

# To return to the display of each source, press

BAND.

Note

If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

1 Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad-

justed, Balance will be displayed.

2 Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves

towards the front or rear.

F15to R15is displayed as the front/rear

speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two

speakers are used.

# When the rear output setting is Rear SP :S/W,

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 79.

3 Push MULTI-CONTROL left or right to

adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or

right, the left/right speaker balance moves to-

wards the left or right.

L15to R15is displayed as the left/right

speaker balance moves from left to right.

<CRD4060-A/N>71

Audio Adjustments

En

71

English

Section

13

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 195 196

Commentaires sur ces manuels

Pas de commentaire