Pioneer VSX-LX302 Manuel d'utilisateur télécharger pdf (Page 90)

> Network Functions > Specifications > Advanced Setup > Listening Modes

Troubleshooting Supplementary Information, etc�|

> Basic Manual

Listening Modes

•

To enjoy digital surround playback, such as Dolby

Digital, the audio signals need to pass through a

connection via HDMI cable, digital coaxial cable, or

digital optical cable. Audio output should be set to

bitstream output on the connected Blu-ray Disc player

or other device.

•

Press

on the remote controller several times to

switch the display of the main unit to check the input

format.

Check the following if the above does not fix the problem:

■ Cannot select a desired listening mode

•

Depending on the connecting status of the speaker,

some listening modes may not be selected. Check in

"Selectable Listening Modes" in "Listening Modes" in

the Advanced Manual.

■ There is no sound with Dolby TrueHD, Dolby Atmos,

and DTS-HD Master Audio (for compatible models

only)

•

You need to connect surround back speakers or height

speakers to enjoy Dolby Atmos. Furthermore, Dolby

Atmos can only be enjoyed when the input signals are

Dolby Atmos.

•

If you cannot output formats such as Dolby TrueHD,

Dolby Atmos, or DTS-HD Master Audio according to the

format of the source, in the Blu-ray Disc player settings

try setting "BD video supplementary sound" (or re-

encode, secondary sound, video additional audio, etc.)

to "Off". Change the listening mode for each source

after changing the setting to confirm.

■ About DTS signals

•

With media that switches suddenly from DTS to PCM,

PCM playback may not start immediately. In such

cases, you should stop your player for about 3 seconds

and then resume playback.

•

With some CD and LD players, you will not be able

to playback DTS material properly even though your

player is connected to a digital input on the unit. This is

usually because the DTS bitstream has been processed

(e.g., output level, sampling rate, or frequency response

changed) and the unit does not recognize it as a

genuine DTS signal. In such cases, you may hear

noise.

•

Playing DTS program material, using the pause or skip

function on your player may produce a short audible

noise. This is not a malfunction.

Video

•

Confirm that the connection between the output jack on

the device and the input jack on this unit is correct.

•

Make sure that none of the connecting cables are bent,

twisted, or damaged.

•

When the TV image is blurry or unclear, power code or

connection cables of the unit may have interfered. In

that case, keep distance between TV antenna cable and

cables of the unit.

•

Make sure the switching of input screens is proper at

the monitor side such as a TV.

Check the following if the above does not fix the problem:

■ There is no video

•

Change the input selector on this unit to the position of

the terminal to which the player is connected.

■ There is no picture from a source connected to an

HDMI IN terminal�

•

To display video from the connected player on the

TV while the unit is in standby, you need to enable

"System Setup" - "Hardware" - "HDMI" - "HDMI Standby

Through" in the Home screen. Refer to "System Setup"

- "Hardware" - "HDMI" in "Advanced Setup" in the

Advanced Manual for information about HDMI Standby

Through.

•

To output video to a TV connected to the HDMI OUT

SUB jack (for compatible models only), in the "AV

Adjust" displayed when

is pressed on the remote

controller, select the HDMI OUT jack for output in

"Other" - "HDMI Out".

•

Check if "Resolution Error" is displayed on the main

unit display when video input via HDMI IN jack is not

displayed. In this case, the TV does not support the

resolution of the video input from the player. Change the

setting on the player.

•

Reliable operation with an HDMI-DVI adapter is not

guaranteed. In addition, video signals from a PC are not

supported.

■ Images flicker

•

It is possible that the resolution of the player is not

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 96 97

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-LX302 Manuel d'utilisateur Page 90

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer VSX-LX302