Pioneer UDP-LX800 Manuel d'utilisateur télécharger pdf (Page 57)

Others

Problem Check Remedy

Power does not turn on. Is the power cord

properly connected?

• Plug the power cord securely into the power outlet (page 22).

• Unplug the power cord, wait several seconds, then plug the

power cord back in.

The player’s power turns

off automatically.

Is Auto Power Off set to 15

min or 30 min?

If Auto Power Off is set to 15 min or 30 min, the player’s power

automatically turns off if no operation is performed for the set

amount of time (page 43).

Is Control set to On? The player’s power may turn off together with the power of

the TV connected to the HDMI OUT terminal. If you do not want

the player’s power to turn off when the TV’s power is turned

off, set Control to Off (page 41).

The player’s power turns

on automatically.

Is Control set to On? The player’s power may turn on together with the power of the

TV connected to the HDMI OUT terminal. If you do not want the

player’s power to turn on when the TV’s power is turned on, set

Control to Off (page 41).

This unit cannot be

operated.

• Use within the specified usage temperature range (page 61).

• If the power cannot be turned off (to standby), reset the unit.

Press and hold the ^ STANDBY/ON button for approx. five

seconds. When the button indicator turns off, release your

finger.The unit restarts and can now be operated.

The player cannot be

operated with the remote

control.

Are you operating the

remote control from a

point too far away from

the player?

Operate from within 7 m of the remote control sensor.

Are the batteries dead? Replace the batteries (page 5).

Unit heats up during use. Depending on the usage environment, the temperature of the

unit's cabinet may increase somewhat during use, but this is

not a malfunction and there is no need to worry.

Input of the connected TV

and AV system switches

automatically.

Is Control set to On?

The input of the TV and AV system (AV receiver or amplifier, etc.)

connected to the

HDMI OUT

terminal may automatically switch to

the player when playback starts on the player or the menu screen

(

Source

function, etc.) is displayed. If you do not want the inputs

of the connected TV and AV system (AV receiver or amplifier,

etc.) to switch automatically, set

Control

Off

(page 41).

Settings I have made have

been cleared.

• Have you disconnected

the power cord while the

player’s power was on?

• Has there been a power

failure?

Always press ^ STANDBY/ON on the player’s front panel or

^ STANDBY/ON on the remote control and check that POWER

OFF has turned off from the player’s front panel display before

disconnecting the power cord. Be particularly careful when the

power cord is connected to the AC outlet on another device

because the player turns off in conjunction with the device.

USB (external storage)

device does not work

with this player properly.

Is the USB device

properly connected?

• Turn the player’s power off, then turn the power back on.

• Turn the player’s power off, then reconnect the external

storage device (page 21).

Is the USB device

connected via an

extension cable?

Do not use an extension cable. The player may not work

properly with it.

Is the external storage

device connected to the

USB port via a memory

card reader or USB hub?

External storage device may not work if connected to the USB

port via a memory card reader or USB hub.

Does the external storage

device contain multiple

partitions?

External storage devices may not be recognized if they

contain multiple partitions.

Is the external storage

device write-protected?

Turn the player’s power off, then disable the write-protection.

Is the USB device’s file

system FAT16 or FAT32?

USB devices formatted in the FAT16 or FAT32 file system can

be used.

Some external storage devices may not operate.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Commentaires sur ces manuels

Pas de commentaire

Pioneer UDP-LX800 Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer UDP-LX800