Pioneer UDP-LX800 Manuel d'utilisateur télécharger pdf (Page 41)

HDMI

HDMI Mode Single This is selected when connecting a device for use with the HDMI

OUT (MAIN) terminal only.

Separate Select this when you want to output the video and audio separately,

the video from the HDMI OUT (MAIN) terminal, the audio from the

HDMI OUT (SUB) terminal.

Pure Audio Select this to enjoy music only with a better sound quality when

devices are connected to both HDMI output terminals. With this

setting, music is output from the HDMI OUT (SUB) terminal only, and

video signals are only output from the HDMI OUT (MAIN) terminal

when DISPLAY is pressed.

Also refer to Setting the HDMI Mode on page 17.

Color Space RGB Select this to output the video signals as RGB signals. Choose this if

the colors seem too faint and the black seems too bright.

YCbCr4:4:4 Select this to output the video signals as YCbCr 4:4:4 signals.

YCbCr4:2:2 Select this to output the video signals as YCbCr 4:2:2 signals.

YCbCr4:2:0 Select this to output the video signals as YCbCr 4:2:0 signals.

Full RGB Select this to output the video signals as RGB signals. Choose this if

the colors seem too dense and all the dark colors are displayed in a

uniform black.

When the connected HDMI device does not support YCbCr4:2:0, or an output resolution incompatible with

YCbCr4:2:0 is set, YCbCr4:2:0 signal may not be output even if YCbCr4:2:0 is set.

HDMI Deep Color Auto Select this to automatically output the optimal bit color.

10 bit Select this when outputting the video signals with 10-bit color.

12 bit Select this when outputting the video signals with 12-bit color.

Off Select this when outputting the video signals with normal 8-bit

color.

HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.

PCM Select this to output HDMI audio signals converted to PCM audio

signals.

Reencode When a BD containing secondary audio and interactive audio is

played, the two audio signals are mixed and converted to Dolby

Digital audio or DTS audio for output.

Control On Select this to control the player with the remote control of the

connected AV device using an HDMI cable. Also refer to page 17.

Off Select this when you do not want to control the player with the

remote control of the connected AV device using an HDMI cable.

To use PQLS function (page 18), Control must be set to On.

HDMI 3D Auto With 3D discs, the disc is played with 3D images.

Off 3D images are not played.

3D Notice Yes This sets whether or not to display the 3D notice when playing 3D

images.

Network

IP Address Setting Select this to set the IP address of the player and DNS server (page 44).

Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 44).

Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS

server (primary) and DNS server (secondary).

Connection Test Select this to test the network connection (page 44).

BD-Live Connection Permitted All discs are allowed to connect to BD-LIVE.

Partial Permitted Only discs whose safety has been confirmed are allowed to connect to

BD-LIVE.

Prohibited No disc is allowed to connect to BD-LIVE.

Setting Options Explanation

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Pioneer UDP-LX800 Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer UDP-LX800