Pioneer VSA-AX10 Manuel d'utilisateur télécharger pdf (Page 49)

BASIC

Basic Operation

Listening Modes

The five listening mode types on the amplifier are explained here. These can be turned on from the front panel

or from the AMPLIFIER MAIN screen on the remote control. To select listening modes see page 46.

The kind of playback you can get in the listening modes depends on what kind of source (DVD, etc.) you are

using. The basic distinction is between 2 channel sources and multichannel sources. The playback available to

you with these modes will differ depending on the source, speaker configuration the LISTENING CH SELECT

setting. This is explained below.

Basically the ADVANCED CINEMA mode is for movie sources and the ADVANCED CONCERT mode is for music

sources. The STANDARD, HOME THX and STEREO modes can be used with any source though the latter won't

offer surround sound. Try different settings with various soundtracks to see which you like.

You must choose one of the surround modes in order to get surround sound. Depending on your setup, in

STEREO mode only the front two speakers, and sometimes the subwoofer (if you have one), are used.

STEREO modes

When a source is played in this mode, it plays through just the front left and right speakers (and possibly your

subwoofer depending on your speaker settings). Dolby Digital, MPEG and DTS multichannel sources are

downmixed to stereo.

STEREO

In STEREO mode the audio plays according to the surround setup settings and you can still use Acoustic

Calibration EQ, Digital NR, Midnight mode, Loudness mode and Tone Control functions.

DIRECT

In DIRECT mode, the audio passes through the shortest signal path possible to remain as close to the source

audio quality as possible.

Note: If you switch on Acoustic Calibration EQ, Digital NR, Midnight mode, Loudness mode or Tone Control

when DIRECT is selected, the amplifier automatically switches to STEREO.

STANDARD modes

This mode is for pure decoding of Dolby Digital, MPEG, Dolby Surround and DTS sources as well as surround

matrix decoding of 2 channel sources. It is good for enjoying regular movies/videos that have been recorded in

Dolby Digital, Dolby Surround. DTS, STANDARD TX/SX is also the basic mode for enjoying sources with

surround and surround back channels. For more detailed information see p.12, 26, 38-40. The display will show

you what kind of source (Dolby Digital, DTS, etc.) is being played.

For 2 Channel Sources:

2PRO LOGIC II MOVIE

This mode gives 5.1 channel surround sound. It is suitable for movies, especially those recorded in Dolby

Surround. The channel separation and movement of surround effects is comparable to Dolby Digital 5.1.

2PRO LOGIC II MUSIC

This mode gives 5.1 channel surround sound and is suitable for music. Compared to the Movie Mode, the

surround effect is more enveloping.

2PRO LOGIC

This mode gives 4.1 channel surround sound. It is less sensitive to the quality of the source material, so

may be useful when PRO LOGIC II MOVIE/ MUSIC modes do not give good results.

NEO:6 CINEMA

This mode gives 6.1 channel surround sound and is suitable for movies. The NEO:6 Cinema mode delivers

good channel separation for movie soundtracks.

NEO:6 MUSIC

This mode gives 6.1 channel surround sound and is suitable for music. The NEO:6 Music mode plays the

stereo source as is through the front left/right speakers, and generates a natural, ambient surround and

center sound.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSA-AX10 Manuel d'utilisateur Page 49

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSA-AX10