Pioneer VSA-AX10 Manuel d'utilisateur télécharger pdf (Page 35)

PREPARATION

Displays & Controls

13 TONE control buttons

TONE button

This button switches between TONE ON and

TONE BYPASS, which bypasses the tone

circuitry.

BASS/TREBLE button (See p.55)

Use to select whether the bass or treble will be

adjusted.

(–/+) buttons (See p.55)

Use to adjust the frequencies.

14 DIGITAL NR button (see p.53)

Switches the DIGITAL NR on or off (cannot be

used in THX).

INPUT ATT. button

Use to lower the input level of an analog signal

that is too powerful, thus causing the amplifier to

distort. In this case the overload (OVER) indicator

will be flashing furiously.

EFFECT/CH LEVEL buttons

Switches the tone adjust controls between the

front, center, surround and surround back

speakers. You can then use the + and – buttons

to adjust the sound (see p.52).

While in Advanced mode, you can also adjust

the effect level.

17 LISTENING CH SELECT button (See

p.47, 56 & 57)

Use this button to select the number of

channels used for playback (5.1, 7.1, or AUTO).

18 PHONES jack

Connect headphones for private listening (no

sound will be heard through the speakers).

SP SYSTEM A/B button (See p.68)

Use to select the speaker system. A is the

primary setting. The button cycles through the

speaker systems as follows: A]B]A&B]off.

Different conditions apply when bi-amping the

speakers. For this case refer to page 67.

SIGNAL SELECT button (see p.48)

Use to select the type of signal being input into

the amplifier. Press SIGNAL SELECT repeatedly

to select one of the following:

ANALOG – To select an analog signal.

DIGITAL – To select an optical or coaxial digital

signal.

2 RF – To select an 2 RF signal.

AUTO – This is the default setting. If there are

analog, digital and 2 RF signals input, the

amplifier automatically selects the 2 RF signal.

If there are analog and digital signals input the

digital will be selected.

VIDEO SELECT button (See p.58)

Switches the amplifier between the various

types of video input.

TAPE 2 MONITOR button

Selects the tape deck (MD recorder, etc.)

connected to the TAPE 2 MONITOR inputs/

outputs. Allows monitoring of a recording as

it's being made.

MULTI CH INPUT button

Selects the component (for example, a DVD-

Audio player) you have hooked up to the MULTI

CH INPUT terminals.

SETUP MIC jack

Plug in the setup mic here. This is very impor-

tant for setting up your system to get proper

surround sound.

25 Front VIDEO INPUT jacks (See p.20)

DIGITAL IN : digital input for connecting a

game console, portable DVD player, video

camera (etc.), that has an optical digital connec-

tion.

S VIDEO : Video input for connecting a video

camera (etc.), that has an S video out.

RCA VIDEO / AUDIO (L/R) : Video input for

connecting a video camera, etc. that has

standard RCA video/audio outputs.

—

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSA-AX10 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSA-AX10