Pioneer SC-LX59 Manuel d'utilisateur télécharger pdf (Page 66)

Basic playback

Listening to the radio

The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a

station below. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station

presets on page 66 for more on how to do this.

1 Press TUNER to select the tuner.

2 Use BAND to change the band (FM or AM), if necessary.

3 Tune to a station.

There are three ways to do this:

! Automatic tuning – To search for stations in the currently selected band, press and hold TUNE +/– for about

a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to

search for other stations.

! Manual tuning – To change the frequency one step at a time, press TUNE +/–.

! High speed tuning – Press and hold TUNE +/– for high speed tuning. Release the button at the frequency

you want.

Improving FM sound

If the TUNED or STEREO indicator doesn’t light when tuning to an FM station because the signal is weak, press

MPX to switch the receiver into mono reception mode. This should improve the sound quality and allow you to

enjoy the broadcast.

Using the noise cut mode

The two noise cut modes can be used when receiving AM broadcasts. Press MPX to select the noise cut mode (1

to 2).

Tuning directly to a station

1 Press TUNER to select the tuner.

2 Use BAND to change the band (FM or AM), if necessary.

3 Press D.ACCESS (Direct Access).

4 Use the number buttons to enter the frequency of the radio station.

For example, to tune to 106.00 (FM), press 1, 0, 6, 0, 0.

If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.

Saving station presets

If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy

recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. This

receiver can memorize up to 63 stations, stored in seven banks, or classes (A to G) of 9 stations each.

1 Tune to a station you want to memorize.

See Listening to the radio on page 66 for more on this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET MEMORY, then a blinking memory class.

3 Press CLASS to select one of the seven classes, then press PRESET +/– to select the station

preset you want.

You can also use the number buttons to select a station preset.

4 Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the receiver stores the station.

Listening to station presets

1 Press TUNER to select the tuner.

2 Press CLASS to select the class in which the station is stored.

Press repeatedly to cycle through classes A to G.

3 Press PRESET +/– to select the station preset you want.

! You can also use the number buttons on the remote control to recall the station preset.

Naming station presets

For easier identification, you can name your station presets.

1 Choose the station preset you want to name.

See Listening to station presets on page 66 for how to do this.

2 Press TOOLS (TUNER EDIT).

The display shows PRESET NAME, then a blinking cursor at the first character position.

3 Input the name you want.

Use i/j (or TUNE i/j of front panel) to select a character, k/l (or PRESET k/l of front panel) to set the

position, and ENTER to confirm your selection.

Notes

! To erase a station name, simply repeat steps 1 to 3 and input eight spaces instead of a name.

! Once you have named a station preset, you can press DISP when listening to a station to switch the display

between name and frequency.

An introduction to RDS (for Europe)

Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of

information-the name of the station and the kind of show they’re broadcasting, for example.

One feature of RDS is that you can search by type of program. For example, you can search for a station that’s

broadcasting a show with the program type, JAZZ.

You can search the following program types:

! In addition, there are two other program types, TEST and NONE. You can’t search for these.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 148 149

Commentaires sur ces manuels

Pas de commentaire

Pioneer SC-LX59 Manuel d'utilisateur Page 66

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer SC-LX59