Pioneer SC-LX58 Manuel d'utilisateur Page 42

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 41
42
Connecting your equipment
03
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 108 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 74 .
! You must select HDZONE in Speaker system setting (page 102 ) to use this setup.
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
(Single)
A
SURROUND BACK
RL
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
R
Sub zone (HDZONE) Main zone
L
(Single)
A
SURROUND BACK
RL
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
HDMI IN
2
1
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN
(
10/100
)
LAN
(
10/100
)
WAN
321
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
Computer
NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see Network Setup menu on page 105 .
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
 
Vue de la page 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 139 140

Commentaires sur ces manuels

Pas de commentaire