Pioneer PDP-LX508G Manuel d'utilisateur télécharger pdf (Page 51)

Using with other equipment

English

3 Select “Playback Order” (/).

4 Select “Name Order” or “Random” (/).

5 Select “Repeat Mode” (/).

6 Select “Single Time” or “Loop” (/).

• With “Loop” selected, Slide Show is repeated until RETURN is

pressed.

7 Select “Playback Mode” (/).

8 Select “Auto” or “Manual” (/).

• With “Auto” selected, images automatically change at the

specified intervals.

• With “Manual” selected, images change each time you press

P+/P–.

9 If you have selected “Auto” in step 8, press / to select

“Interval (sec.)”, and then press / to select the desired

display duration for individual images.

• You can select from among 3 seconds, 5 seconds, 10 seconds,

20 seconds, 30 seconds, 60 seconds, and 90 seconds.

10 To start the Slide Show screen, press RETURN to display

the thumbnail screen and then press RED.

• To quit the Home Gallery function, press HOME MENU.

Starting the Slide Show screen

After setting up for Slide Show, you can start Slide Show to

sequentially change images.

1 To start the Slide Show screen, press RED when a

thumbnail screen is displayed.

• With “Auto” selected for “Playback Mode”, images

automatically change at the specified intervals.

• With “Manual” selected for “Playback Mode”, press P+/P– to

change images.

• While images are automatically changing, you can stop and

hold automatic image change for approximately 90 seconds by

pressing RED. To resume, press RED again.

2 When quitting the Slide Show screen, press RETURN to

restore the thumbnail screen or HOME MENU to quit the

Home Gallery function.

Note

• When paused during a slideshow is played, the screen

automatically changes to the next image in five minutes.

• If no operation is continued for five minutes, the Home Gallery

function automatically finishes except when the slideshow is

played with “Loop” selected for the “Repeat Mode”.

Adjusting the picture quality

When a thumbnail screen is displayed, press YELLOW. The same

picture adjustment screen as the PC source is displayed. For the

subsequent procedure, see page 29.

Controlling other equipment using the

supplied remote control unit

Using the supplied remote control unit, you can control other

equipment in connection: a set-top box (STB), DVD player, DVD/

HDD recorder (DVR), BD player or VCR.

Before using this function, you need to preset the supplied remote

control unit with the manufacture code of the equipment to be

controlled. When you then want to control the equipment, press

SELECT on the remote control unit to select an appropriate mode

depending on the equipment; the selection is switched among TV,

STB, DVD/DVR, and VCR. The corresponding mode indicators on

the remote control unit show the currently selected mode.

• When you control a BD player, select the DVD/DVR mode.

Presetting manufacture codes

1 Press SELECT on the remote control unit to select the STB,

DVD/DVR, or VCR mode depending on the equipment.

2 After confirming that the indicator of the previously

selected mode goes off, press and hold SELECT, and then

press 1 on the remote control unit.

• The corresponding mode indicator flashes.

3 Press 0 to 9 to enter a three-digit manufacture code.

• See the manufacture code list to identify an appropriate code.

• The mode indicator lights up for approximately one second and

then goes off; presetting the manufacture code is completed.

Note

• If you perform no operation for approximately one minute while

a mode indicator is flashing, the code presetting procedure is

quitted.

Home Gallery

HOME MENU

Exit

Display Mode

Slide Show Setup

Playback Order

Name Order

Repeat Mode

Single time

Playback Mode

Auto

Interval (sec)

Normal

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 265 266

Pioneer PDP-LX508G Manuel d'utilisateur Page 51

Commentaires sur ces manuels