Pioneer DVR-450H-S Manuel d'utilisateur télécharger pdf (Page 44)

Recording

05

44

En

Auto Replace Rec.

– Automatically erases

the previous daily or weekly recording when

the next one is recorded.

Genre

– Select a record genre (for HDD

recording only).

Dual Mono/Bilingual Recording

– Select

which channel of a dual mono/bilingual

broadcast to record (necessary if recording

to a Video mode DVD or to the HDD with the

HDD Recording Format

set to

Video Mode

On

).

HDD Recording Format

– Select

Video

Mode On

or

Video Mode Off

depending on

whether you need high-speed copying to

Video mode DVD capability or not.

5 After entering all the timer recording

information, highlight ‘Store

Programme’ and press ENTER.

The timer recording list screen is displayed

again. The timer programme you just input

appears in the list. The rightmost column

shows various timer recording status

messages:

•

OK

– Can be recorded.

•

Time Over

– Not enough space on the

HDD (the recording won’t finish).

•

Over 12h

– Recording time of over 12

hours set (when recording to the HDD

the recording will be split into two titles).

•

Overlap

– Two timer programmes

partially or completely overlap. The one

starting earlier will take priority.

•

Until

... (eg.,

Until 8/13

) – For a regular

recording, the last programme that

could be recorded is shown.

•

Data Over

–Can’t record because the

disc management area of the disc is full.

• Cancel Once

– A regular timer

programme is set to skip.

• Can’t Rec

– Not possible to record.

•

Title Over

– Can’t record because there

is already the maximum number of titles

on the disc (HDD: 999; DVD: 99).

• Recording

– The programme is currently

recording.

• Standby

– The recorder is in timer

recording standby.

•

nothing displayed

– Another timer

recording or copying is in progress.

6 To exit the timer recording screen,

press HOME MENU.

Tip

• To enter a title name for the timer

recording in advance, select

Set Title

Name

and follow the on-screen display.

Note

• If you set a DVD timer recording but

there is no recordable DVD disc loaded,

or the disc loaded doesn’t have enough

free space for the complete recording,

Recovery

is shown. In this case (unless

you load a suitable disc before the

recording actually starts), the recorder

will use the HDD for recording. (The

message

Can’t Rec

will appear if there

are already 999 titles on the HDD or if

there is not enough free space on the

HDD for recording.)

• For a DVD timer recording, if

Optimized

Rec

(see

Optimized Rec

on page 112) is

set to

On

, the recorder will adjust the

recording quality to try and fit the

recording on the disc. If the recording

will not fit onto the disc even on

MN1

(

MN4

for DVD+R/+RW) recording

quality then the Recovery Recording

feature will automatically make the

recording to the HDD instead.

• If there is very little free space left on the

HDD, an Auto Replace Recording may

not complete successfully.

• If the HDD is being used for playback or

high-speed copying when an Auto

Replace Recording is due to start, the

new timer recording will not replace the

old one. However, the next time the timer

recording starts, both of the older two

programmes will be erased.

DVR650HS_TLT_EN.book 44 ページ２００７年３月２０日　火曜日　午後１２時１９分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 136 137

Commentaires sur ces manuels

Pas de commentaire