Pioneer DVR-450H-S Manuel d'utilisateur télécharger pdf (Page 64)

Playing and recording from a DV camcorder

07

64

En

Chapter 7

Playing and recording from a

DV camcorder

You can play back and record video from a

DV camcorder connected to the

DV IN

jack

on the front panel of this recorder.

Important

• If you connect a second recorder using a

DV cable, you cannot control the second

unit from this one.

• You can’t control this unit remotely from

a component connected to the

DV IN

jack.

Playing from a DV camcorder

1 Make sure your DV camcorder is

connected to the front panel DV IN jack.

2 From the Initial Setup menu, check

that the DV audio input is setup as you

would like.

See

DV Input

on page 109 for more on this.

• Check also that the

Audio In

settings for

External Audio

and

Dual Mono

Recording/Bilingual Recording

are as

you want them (see

Audio In

on page 108).

3 Select ‘DV’, then ‘DV Video

Playback’ from the Home Menu.

4 Start playback on the camcorder.

Images from the camcorder should appear

on your TV.

• To record the incoming video, Use the

HDD

and

DVD

button to select the HDD

or a DVD for recording, then press



REC

. Press



STOP REC

to finish

recording.

If there is no signal from the device

connected to the DV jack, or the signal is

copy-protected, recording will pause. It

will automatically restart once there is a

recordable signal.

• The recorder will only start recording

from the

DV IN

jack if there is a valid

signal. Recording will pause if the signal

is interrupted during recording.

• If your source is copy-protected using

Copy Guard, you will not be able to

record it. See

Restrictions on video

recording

on page 35 for more details.

Recording from a DV

camcorder

• The source signal must be DVC-SD

format.

• You can’t record date and time

information from DV cassette.

• During DV recording, if a part of the tape

is blank, or has copy-protected material

on it, this recorder will pause recording.

Recording will restart automatically

when there is a recordable signal.

However, if there is more than two

minutes of blank tape, this recorder will

stop recording and the camcorder

should stop (depending on the

camcorder).

Copying from a DV source

Using the recorder’s remote, you can control

both the camcorder and this recorder.

Important

• Some camcorders cannot be controlled

using this recorder’s remote.

• For best results when recording from a

DV camcorder to this recorder, we

recommend cueing the camcorder to the

place you want to start recording from

and setting the camcorder to play-pause.

HOME

MENU

DVR650HS_TLT_EN.book 64 ページ２００７年３月２０日　火曜日　午後１２時１９分

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 136 137

Commentaires sur ces manuels

Pas de commentaire