Pioneer RM V2550E Manuel d'utilisateur télécharger pdf (Page 180)

170

MVP MANUAL

9. INSTALLING AND REMOVING BOARDS

(Fig. A)

(Fig. B)

(Fig. C)

Screw (3x6)x6

1 Remove the front panel.

2 Remove the screws fastening the board to the

removed. (Fig. C)

3 Lift the ejectors indicated with white arrows. (Fig.

4 Gently draw out the board along the rails.

5 Set the front panel back in place.

For your safety

¶ Be sure to turn the power off before installing

and removing boards.

1 Remove the screws from the front panel, then

open the front panel. (Fig. A)

2 Insert the board gently along the rails.

Refer to the board layout for the positions for in-

serting the boards.

3 Press the

part of the white plastic part

strongly with a finger and insert the board fully

to the back. (Fig. C)

* The board may not go fully to the back if pressed

on the metal part.

4 Fasten with the flanged screws (3x6). (Fig. C)

5 Set the front panel back in place.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 200 201

Pas de commentaire

Pioneer RM V2550E Manuel d'utilisateur Page 180