Pioneer RM V2550E Manuel d'utilisateur télécharger pdf (Page 57)

INSTALLATION AND ASSEMBLY

[Fig. 3-4-10]

[10]Block the holes on the cabinets (on the surfaces that become the outer panels of the system) using light

insulating stickers. [Fig. 3-4-11]

Light insulating stickers x 10 (provided with cabinets)

[9] Attach the screen frame support brackets onto the bottoms of the cabinets using screws. [Fig. 3-4-10]

Screen frame support brackets x 4 (provided with screen frames)

Screws (4 dia. x 16) x 8 (provided with screen frames)

[Fig. 3-4-11]

7 Procedure when the system is installed up against the rear wall

[11]When the system is to be installed up against the rear wall, perform the procedure till step [10] above while

the system is apart from the rear wall, then complete the rear wiring.

[12]Check the operations including those of the power supply.

[13]After ensuring that there is no problem in operation, release the adjusters of the stands temporarily and

approach the entire system to the wall by moving it slowly and cautiously.

[14]After moving the system to the installation location, secure the adjusters of the stands.

(Side panel) 2 holes per surface

Light insulating sticker

(Top panel) 1 hole per surface

Side of cabinet

Screen frame support brackets

Holes to be used (x 2 on left and right)

NOTE) To prevent hazard, never mount on a cabinet.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 200 201

Pas de commentaire

Pioneer RM V2550E Manuel d'utilisateur Page 57