Pioneer AVIC 5000 NEX Manuel d'opérations télécharger pdf (Page 220)

Map coverage

For details about the map coverage of this pro-

duct, refer to the information on our

website.

Using the LCD screen correctly

Handling the LCD screen

! When the LCD screen is subjected to direct

sunlight for a long period of time, it will be-

come very hot, resulting in possible da-

mage to the LCD screen. When not using

this product, avoid exposing it to direct

sunlight as much as possible.

! The LCD screen should be used within the

temperature ranges shown in Specifica-

tions.

! Do not use the LCD screen at temperatures

higher or lower than the operating tem-

perature range, because the LCD screen

may not operate normally and could be da-

maged.

! The LCD screen is exposed in order to in-

crease its visibility within the vehicle.

Please do not press strongly on it as this

may damage it.

! Do not push the LCD screen with excessive

force as this may scratch it.

! Never touch the LCD screen with anything

besides your finger when operating the

touch panel functions. The LCD screen can

scratch easily.

Liquid crystal display (LCD) screen

! If the LCD screen is near the vent of an air

conditioner, make sure that air from the air

conditioner is not blowing on it. Heat from

the heater may break the LCD screen, and

cool air from the cooler may cause moist-

ure to form inside this product, resulting in

possible damage.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are

due to the characteristics of the LCD

screen and do not indicate a malfunction.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a cellular phone, keep the an-

tenna of the cellular phone away from the

LCD screen to prevent disruption of the

video in the form of disturbances such as

spots or colored stripes.

Maintaining the LCD screen

! When removing dust from or cleaning the

LCD screen, first turn this product off and

then wipe the screen with a soft dry cloth.

! When wiping the LCD screen, take care not

to scratch the surface. Do not use harsh or

abrasive chemical cleaners.

LED (light-emitting diode)

backlight

A light emitting diode is used inside the dis-

play to illuminate the LCD screen.

! At low temperatures, using the LED back-

light may increase image lag and degrade

the image quality because of the character-

istics of the LCD screen. Image quality will

improve with an increase in temperature.

! The product lifetime of the LED backlight is

more than 10 000 hours. However, it may

decrease if used in high temperatures.

! If the LED backlight reaches the end of its

product lifetime, the screen will become

dimmer and the image will no longer be

visible. In that case, please consult your

dealer or the nearest authorized Pioneer

Ser vice Station.

En

220

Appendix

Appendix

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 226 227 228

Commentaires sur ces manuels

Pas de commentaire