Pioneer GM-X354 Manuel d'utilisateur télécharger pdf (Page 4)

3

Setting the Unit

Gain Control

Adjusting the gain controls A and B will

help match the output of the car stereo

to the Pioneer amplifier. Normally, set

the gain controls to the “NORMAL”

position. If the output is low, even when

the volume of the car stereo is turned

up, turn these controls clockwise. If

there is distortion when the volume of

the car stereo is turned up, turn these

controls counter-clockwise.

• If you only use one input plug, set the gain

controls for speaker outputs A and B to the

same position.

• When using with an RCA equipped car

stereo (standard output of 500 mV), set to

the NORMAL position. When using with

an RCA equipped Pioneer car stereo with

max. output of 4 V or more, adjust level to

match the car stereo output level.

• If you hear too much noise when using the

speaker input terminals, turn the gain

control counter-clockwise.

Input Select Switch

For two-channel input, slide this switch

to the left. For four-channel input, slide

this switch to the right.

1 2 3 4 5 6 7 8 9 ... 75 76

Commentaires sur ces manuels

Pas de commentaire