Pioneer SC-25 Instructions d'exploitation télécharger pdf (Page 58)

Setting the Video options

There are a number of additional picture settings you can make using the VIDEO PARAMETER

menu. The defaults, if not stated, are listed in bold.

Important

! Note that if an option cannot be selected on the VIDEO PARAMETER menu, it is unavailable due to

the current source, setting and status of the receiver.

! All of the setting items can be set for each input function.

! Setting items other than V.CONV can only be selected when V.CONV is set to ON.

1 Press to the receiver operation mode, then press VIDEO PARAMETER.

2 Use i/j to select the setting you want to adjust.

Depending on the current status/mode of the receiver, certain options may not be able to be

selected. Check the table below for notes on this.

3 Use k/l to set as necessary.

See the table below for the options available for each setting.

4 Press RETURN to confirm and exit the menu.

Video parameter menu

Setting What it does Option(s)

V.CONV

(Digital Video Converter)

<a>

Converts video signals for output from the MONITOR

OUT jacks (including HDMI OUT connector) for all

video types (see page 22).

OFF

j ! You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when

any of the stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Surround Back mode if the surround speakers are on and the SB setting is set to

NO or if the setting for not connecting surround back speakers is selected in the Speaker System settings.

k ! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the

stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Height mode if the surround speakers are on and the FH setting is set to NO or

if the setting for not connecting front height speakers is selected in the Speaker System settings. Also, the

Virtual Height mode cannot be used when playing signals containing actual front height channel information.

l ! This mode is effective for contents with a sampling frequency of 48 kHz or less.

! You can’t use the Virtual Depth mode when the headphones are connected to this receiver or when any of the

stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Depth mode if the surround speakers are on.

09 Using other functions

Setting What it does Option(s)

RES

(Resolution)

<b>

Specifies the output resolution of the video signal

(when video input signals are output at the HDMI OUT

connector, select this according to the resolution of

your monitor and the images you wish to watch).

(“480p” indicates the 480p/576p resolution setting.)

AUTO

PURE

480p

720p

1080i

1080p

1080/24p

PCINEMA

(PureCinema)

<c, e>

This setting optimizes the operation of the progressive

scanning circuit for playing film materials. Normally set

it to AUTO. If the picture seems unnatural, switch this

to ON or OFF.

AUTO

OFF

P.MOTION

(Progressive Motion)

<c, e>

Adjusts the motion and still picture quality when video

output is set to progressive.

c –4 to +4 d

Default: 0

STREAM

(Stream Smoother)

<e>

This improves elements that reduce picture quality

mainly noticeable in network contents, such as mos-

quito noise and block noise.

When AUTO is selected, this unit’s Stream Smoother

function automatically turns on when network contents

are played on the player supporting Stream Smoother

and connected to this unit by HDMI (assuming that

integrated operation with the Control with HDMI func-

tion is set). (Stream Smoother Link)

AUTO

OFF

V.ADJ

(Advanced Video Adjust)

Sets the optimum picture quality for the type of moni-

tor that is connected. Select PDP for plasma displays,

LCD for liquid crystal monitors, FPJ for front projectors,

PRO for professional monitors. If you want to adjust the

picture quality settings to your personal tastes, select

MEMORY.

PDP

LCD

FPJ

PRO

MEMORY

YNR

<d, e>

Reduces noise in the luminance (Y) signal.

c 0 to +8 d

Default: 0

CNR

<d, e>

Reduces noise in the input’s color (C) signal.

c 0 to +8 d

Default: 0

BNR

<d, e>

Reduces block noise (block-shaped distortion gener-

ated upon MPEG compression) in the picture.

c 0 to +8 d

Default: 0

MNR

<d, e>

Reduces mosquito noise (distortion generated at the

contours of the picture upon MPEG compression) in

the picture.

c 0 to +8 d

Default: 0

DETAIL

<d, e>

Adjusts how sharp edges appear.

c 0 to +8 d

Default: 0

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Pioneer SC-25 Instructions d'exploitation Page 58

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Pioneer SC-25