Pioneer VSX-D714 Manuel d'utilisateur télécharger pdf (Page 44)

Setting up the receiver

07

44

En

Crossover frequency setting

• Default setting:

100 Hz

Crossover frequency is the point where the

receiver divides the high and low sounds (the

frequencies) between the speakers. Since

most smaller speakers can’t handle deep

bass tones, you can send these sounds to the

subwoofer (or if you don’t have a subwoofer,

the large (

L

) speakers in your system) instead

of the speakers set to small (

S

) in your setup.

Choose the point at which you want the

frequency routed to the subwoofer (or

L

speakers).

We recommend setting this to

200Hz

if your

S

speakers are smaller bookshelf-type

speakers.

• Use



or



to specify the crossover

frequency for your small speakers (100 Hz,

150 Hz or 200 Hz).

100Hz

Sends bass frequencies below 100 Hz to

the subwoofer (or

L

speakers).

150Hz

Sends bass frequencies below 150 Hz to

the subwoofer (or

L

speakers).

200Hz

Sends bass frequencies below 200 Hz to

the subwoofer (or

L

speakers).

• If all speakers (front, center, and

surround) are set to

L

, the crossover

frequency can’t be set because there are

no

S

speakers ( appears in the

display).

LFE attenuator setting

• Default setting:

0 dB

Dolby Digital and DTS audio sources include

ultra-low bass tones. Set the LFE attenuator

as necessary to prevent the ultra-low bass

tones from distorting the sound from the

speakers.

• Use



or



to set the attenuation

level (0 dB, 10 dB or

dB(

∞

)).

• When

∞

is selected ( appears in the

display), LFE cannot be heard.

Front left speaker distance setting

• Default setting:

3 m

Sets the distance from the front left speaker to

the listening position.

• Use



or



to set the distance of the

front left speaker from the main listening

position (within the range of 0.1 m to 9.0

m).

Center speaker distance setting

• Default setting:

3 m

The center speaker is normally placed directly

in the front of the listening room and closer to

the listening position than the front speakers.

This means that the sound from the center

speaker will be heard before the front

speakers. To prevent this, set the center

speaker distance setting to delay the sound

from the center speaker so that the sound

from the front and center speakers will be

heard at the same time.

100Hz 150Hz

200Hz

0 dB 10 dB

∞

(displays )

VSX_714_814.fm 44 ページ２００４年１月２８日　水曜日　午前１０時１８分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 145 146

Commentaires sur ces manuels

Pas de commentaire