Pioneer VSX-816 Manuel d'utilisateur télécharger pdf (Page 7)

5 minute guide

English

Français

Deutsch

Nederlands

Italiano

Español

Chapter 2:

5 minute guide

Introduction to home theater

Home theater refers to the use of multiple

audio tracks to create a surround sound effect,

making you feel like you're in the middle of the

action or concert. The surround sound you get

from a home theater system depends not only

on your speaker setup, but also on the source

and the sound settings of the receiver.

This receiver will automatically decode

multichannel Dolby Digital, DTS, or Dolby

Surround sources according to your speaker

setup. In most cases, you won’t have to make

changes for realistic surround sound, but

other possibilities (like listening to a CD with

multichannel surround sound) are explained in

Listening to your system

on page 28.

Listening to Surround Sound

With the following quick setup guide, you

should have your system hooked up for

surround sound in no time at all. In most

cases, you can simply leave the receiver in the

default settings.

• Be sure to complete all connections before

connecting to an AC power source.

1 Connect your DVD player and TV.

See

Connecting a DVD player and TV

on page 13

to do this. For surround sound, you’ll want to

hook up using a digital connection from the

DVD player to the receiver.

2 Connect your speakers and place them for

optimal surround sound.

See

Connecting the speakers

on page 19.

Where you place the speakers will have a big

effect on the sound. Place your speakers as

shown below for the best surround sound

effect. Also see

Hints on speaker placement

page 20 for more on this.

3 Plug in and switch on the receiver, followed

by your DVD player, subwoofer and TV.

Make sure you’ve set the video input on your TV

to this receiver. Check the manual that came

with the TV if you don’t know how to do this.

4 Press QUICK SETUP on the front panel to

specify your speaker setup, room size and

listening position.

Use the

MULTI JOG

dial to select and

ENTER

to confirm your selection. See

Using the Quick

Setup

below for more on this.

5 Play a DVD, and adjust the volume.

Make sure that

DVD

is showing in the

receiver’s display. If it isn’t, press

DVD

on the

remote to set the receiver to the DVD input.

There are several other sound options you can

select. See

Listening to your system

on page 28

for more on this.

Note

1 You may need to set your DVD player to output Dolby Digital, DTS and 88.2/96kHz PCM (2 channel) audio (see your DVD play-

er’s manual for more on this).

2 Depending on your DVD player or source disc, you may only get 2 channel sound. In this case, the listening mode must be set

STANDARD

(see

Listening in surround sound

on page 28 if you need to do this) if you want multichannel surround sound.

Front

speaker

(L)

Surround

speaker (LS)

Surround

speaker (RS)

Surround back

speaker (SBL)

Surround

back

speaker (SBR)

Center

speaker

(C)

Subwoofer (SW)

Listening

position

Front

speaker

(R)

VSX_816.book.fm 7 ページ２００５年１２月８日　木曜日　午後６時５４分

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-816 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX-816