Pioneer VSX-52TX Manuel d'utilisateur télécharger pdf (Page 74)

Additional information

Resetting the main unit

Use this procedure to reset all the receiver’s settings to

the factory default. Use the front panel controls to do this.

1 Switch the receiver into standby.

2 While holding down the TONE button, press and

hold the



STANDBY/ON button for about three

seconds.

3 When you see RESET? appear in the display,

press ENTER.

OK?

shows in the display.

4 Press SYSTEM SETUP to confirm.

appears in the display to indicate that the receiver

has been reset to the factory default settings.

Switching the speaker impedance

We recommend using speakers of 8

Ω

with this system,

but it is possible to switch the impedance setting if you

plan to use speakers with a 6

Ω

impedance rating.

• With the receiver in standby, press



STANDBY/

ON while holding down the SPEAKERS button.

Each time you do this, you switch between the

impedance settings:

•

SP 6 OHM

– Use this setting if your speakers are

rated at 6

Ω

•

SP 8 OHM

– Use this setting if your speakers are

rated at 8

Ω

or more.

VSX_52TX.book.fm 74 ページ２００４年５月１４日　金曜日　午前９時２１分

1 2 ... 69 70 71 72 73 74 75 76 77 78 79

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-52TX Manuel d'utilisateur Page 74

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Pioneer VSX-52TX