Pioneer DVR-660H-S Manuel d'utilisateur Page 130

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 129
Additional information
17
130
En
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
If the picture freezes and the front panel and remote control
buttons stop working
•Press (Stop) then try restarting
playback.
•Press the front panel STANDBY/ON
button to switch the power off, then
switch back on and restart playback. If
the power fails to switch off, press and
hold STANDBY/ON for five seconds
until the power switches off.
Can’t record video • When using HDMI Control to r ecord, you must make sure that the
channel information for the Flat Screen TV matches that of this unit. If
the channel information does not match you cannot make recordings.
Use the Auto Channel Setting function to set this unit’s channel
information (page 110).
HDMI Control does not
respond
• Verify that the HDMI cable is firmly connected (page 20).
• Check whether HDMI Control is set to On for this unit and the device
connected to this unit. For more information, refer to the operating
instructions of your Flat Screen TV or AV system.
• Depending on the type of Flat Screen TV, some HDMI input terminals
do not support the HDMI Control function. For details, see the
operating instructions supplied with your Fl
at Screen TV.
• HDMI Control may not operate properly if you do not use a High
Speed HDMI cable.
• This function may not work properly if you have multiple recorders
connected to a single Flat Screen TV or AV system. For more
information refer to the operating instructions of your Flat Screen TV
or AV system.
• Controls may not function properly in certain situations, such as
immediately after you have connect an HDMI cable, turn this unit’s
power off or remove the power cable for this unit or the connected
component. If you experien
ce any problems, set HDMI Control to On
for all connected units, and then display the pictures stored on this
unit on your Flat Screen TV to improve the situations.
• Check whether the connected component supports HDMI Control or
not.
• Certain functions are not supported on with Flat Screen TVs or AV
system.
• We cannot guarantee this unit will work with HDMI Control-
compatible components other than those made by Pioneer. When
using HDMI Control-compatible components manufactured by
companies other than Pioneer, set the HDMI Control to Off
(page 118).
Problem Remedy
DVD
OPEN/CLOSE
STANDBY/ON
USB
DV IN
CH
INPUT
SELECT
STOP REC
HDD
HDD/DVD
STANDBY/ON
DVR660HS_TLT_EN.book 130 ページ 2008年2月20日 水曜日 午前11時33分
Vue de la page 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 139 140

Commentaires sur ces manuels

Pas de commentaire