Pioneer DJ Equipment DJ Effector Manuel d'utilisateur télécharger pdf (Page 5)

5

QUICK OPERATION GUIDE (2/3)

BYPASS button

When the button is pressed (button

indicator flashes), the signal entering

the input connectors is output

directly (without modification) to the

output connectors.

SIGNAL FLOW switch

Selects the order in which signals

are passed through the electronic

sections (from beat effect to digital

jog break, or vice versa).

1. Select the rhythm input mode.

Press the RHYTHM MODE button so that the

button indicator lights.

USING BEAT EFFECTS [RHYTHM MODE]

2. Select effect type.

Press the DELAY, ECHO, PITCH ECHO, TRANS,

FLANGER, FILTER or PHASER button and the

pressed button starts to flash.

3. Select the sound range for the effect.

Press the button of the frequency (LOW, MID,

HI) you wish to affect by the rhythm effect and

the corresponding indicator lights.

5. Input the rhythm.

Tap your finger on the TAP button to input the

desired rhythm. As you input the rhythm, the

rhythm will be calculated and displayed on the

RHYTHM TAP display (up to 8 taps with tap

interval of 2 seconds or less).

7. Apply an effect.

Press the lever towards you (ON position) to

start operation; release it and it returns to the

center position (OFF position). In the center

position (OFF position), the original sound is

not affected. Press the lever away from you to

lock it in position so that the rhythm effect is

applied also when the lever is released.

BPM MODE button

When the BPM MODE button is

pressed while in the rhythm

mode, the mode changes to

the beat effect BPM mode.

MIX dial

Adjusts the balance

between the original

sound and effects.

CHARACTER dial

Sets the parameter 2 of

each effect.

EFFECT

TIME display

BPM

measurement

mode

indicators

DEPTH dial

Sets the parameter 1 of each

effect.

RHYTHM TAP display

BPM COUNTER

4. Set to REC mode.

¶ When the REC button is pressed, the

BPM display indicates “

”.

¶ If no rhythm has been input, the unit

will automatically enter the REC mode

in step 1.

6. Select the overall rhythm time.

The pressed beat select button will light, and

the overall rhythm time will be set at the

multiple corresponding to the pressed button.

1 2 3 4 5 6 7 8 9 10 ... 27 28

Commentaires sur ces manuels

Pas de commentaire