Pioneer DEH-P6900UB Manuel d'utilisateur télécharger pdf (Page 61)

TV tuner

Basic Operations

You can use this unit to control a TV tuner,

which is sold separately.

For details concerning operation, refer to the

TV tuner’s operation manual. This section pro-

vides information on TV operations with this

unit which differs from that described in the

TV tuner’s operation manual.

3

3

3

1

1

1

1

2

2

2

2

1 Band indicator

2 Preset number indicator

3 Channel indicator

1 Press SOURCE to select the TV.

2 Press BAND to select a band.

Press BAND until the desired band is dis-

played, TV-1 or TV-2.

3 To perform manual tuning, push

MULTI-CONTROL left or right.

4 To perform seek tuning, push and hold

MULTI-CONTROL left or right for about one

second and release.

The tuner will scan the channels until a broad-

cast strong enough for good reception is

found.

# You can cancel seek tuning by pushing

MULTI-CONTROL lef t or right.

# If you push and hold MULTI-CONTROL left or

right, you can skip broadcasting channels. Seek

tuning starts as soon as you release

MULTI-CONTROL.

Storing and recalling broadcast

stations

You can easily store up to 12 broadcast sta-

tions for later recall.

! Up to 24 stations, 12 for each of two TV

bands, can be stored in memory.

1 When you find a station that you want

to store in memory press LIST.

2 Use MULTI-CONTROL to store the se-

lected station in memory.

Turn to change the preset number; press and

hold to store.

The preset number you have selected will

flash and then remain lit. The selected station

has been stored in memory.

3 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30

seconds, the display is automatically returned to

the ordinary display.

Using the remote control

You can also store and recall stations assigned

to preset tuning numbers P1to P6by using

the remote control.

% When you find a station that you want

to store in memory, press one of preset

tuning buttons 1 to 6 and hold until the

preset number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected station has been stored in mem-

or y.

The next time you press the same preset tun-

ing button the station is recalled from mem-

or y.

# You can also recall stations assigned to preset

tuning numbers by pushing MULTI-CONTROL up

or down during the channel display.

Available accessories

En

61

English

Section

03

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 80 81

Commentaires sur ces manuels

Pas de commentaire