Pioneer AVIC 800 DVD Guide d'installation télécharger pdf (Page 6)

Connecting the System

Before installing the unit

• This unit is for vehicles with a 12-volt battery and negative grounding. Before installing

it in a recreational vehicle, lorry, or bus, check the battery voltage.

To prevent damage

No ACC positionACC position

• When disconnecting a connector, pull

the connector itself. Do not pull the

lead, as you may pull it out of the con-

nector.

• If this unit is installed in a vehicle that

does not have an ACC (accessory)

position on the ignition switch, the red

lead of the unit should be connected to

a terminal coupled with ignition switch

ON/OFF operations. If this is not done,

the vehicle battery may be drained

when you are away from the vehicle

for several hours.

• To avoid short-circuiting, cover the

disconnected lead with insulating tape.

• To avoid shorts in the electrical sys-

tem, be sure to disconnect the (-) bat-

tery cable before beginning installa-

tion.

ENG/MASTER 96

CRD3803A_inst_001_029_UK 4/1/03 2:22 PM Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 171 172

Pas de commentaire

Pioneer AVIC 800 DVD Guide d'installation Page 6