Pioneer XW-LF1-W Manuel d'utilisateur télécharger pdf (Page 22)

22

En

Please assist with battery

recycling

This product uses a lithium-ion battery.

Lithium-ion batteries are a vital resource

that can be recycled. When throwing the

unit away, please remove the lithium-ion

battery and endeavor to have it recycled.

In regard to cautions for when removing the

lithium-ion battery, please see “Handling

the built-in lithium-ion battery”.

Warning

• Disconnect the AC adapter before

performing these procedures.

• In the event that the power is turned on

while performing these procedures, turn

off the power and then begin the

procedures again.

Caution

• The instructions provided here to “assist

with battery recycling” are meant to

allow the device’s built-in rechargeable

lithium-ion battery to be removed at the

end of the device’s service life, before

final device disposal. The device’s

warranty is invalidated the moment the

device is opened.

• In order to avoid short circuits, remove

the battery only after confirming that the

battery’s storage capacity has been fully

depleted. Even when the power no

longer turns on, some residual current

remains in the battery. It is

recommended to remove the lithium-ion

battery only after leaving the device with

the power turned on for several days, to

assure that the battery is fully depleted.

Removing the built-in

battery

Preparation

This procedure requires the tools listed

below. Be sure to assemble the

necessary items before beginning.

• Phillips (+) screwdriver

• Flat-head (–) screwdriver

1 Remove the stand cover on the

bottom of the product from the

button side.

2 Unscrew the two screws and

remove the battery holder.

Tips

• Unscrew the screws using a Phillips (+)

screwdriver.

Stand cover

Screw

Battery holder

LFA_En.fm 22 ページ２０１４年５月１２日　月曜日　午後３時３９分

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 91 92

Commentaires sur ces manuels

Pas de commentaire