Pioneer X-SMC55-S Manuel d'utilisateur télécharger pdf (Page 26)

Connect to network08

6 If using a wireless LAN connection, input the

router’s SSID, then select the “Security” item set

on the router.

Also, if input of a fixed IP is required, set DHCP to OFF here

and make the setting.

7 If a password is requested, input it here.

8 When settings are completed, click on

“Apply”.

The unit will automatically power down.

9 Disconnect the LAN cable from the unit and

confirm that the router’s power is ON.

If you intend to use the unit in a wired configuration, use a

LAN cable to connect the unit to the router.

10 Press

 STANDBY/ON

When the power is completely on, the NETWORK indicator

will light white, indicating that settings are completed.

IP Address

The IP address to be entered must be defined within the

following ranges. If the IP address defined is beyond the

following ranges, you cannot play back audio files stored

on components on the network or listen to Internet

Radio stations.

Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1

to 172.31.255.254 / Class C: 192.168.0.1 to

192.168.255.254

Subnet Mask

If an xDSL modem or a terminal adapter is directly

connected to this unit, enter the subnet mask listed in

your ISP documentation. In most of the cases, enter

255.255.255.0.

Default Gateway

If a gateway (router) is connected to this unit, enter the

corresponding IP address.

Primary DNS Server/Secondary DNS Server

If there is only one DNS server address listed in your ISP

documentation, enter Primary DNS Server. In case

there are more than two DNS server addresses, enter

Alternate DNS in the other DNS server address field.

Proxy Setup

Select Use Proxy Server when you connect this unit to

the Internet via a proxy server. Enter the Proxy Host

Name and the port number of your proxy server in the

Proxy Port field.

B: Wired connection to a router

with DHCP server

1 Disconnect the power cord from AC power

before performing the connection between

router and this unit.

Use a LAN cable to connect this unit and your router.

2 Connect the AC adapter, and press



STANDBY/ON

Wait for about 30 to 40 seconds.

3 When the power is fully turned on, the

NETWORK indicator will light white.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Pioneer X-SMC55-S Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer X-SMC55-S