Pioneer X-SMC5-K Manuel d'utilisateur Page 47

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 168
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 46
Additional information 15
47
En
English
Français Español
When connected to an HDMI-compatible device
Network
Problem Check Remedy
Picture is not displayed. Is the resolution properly set? Set
HDMI Resolution
properly for the connected device (page 34).
Restore
HDMI Resolution
to the default setting (
720x480p
/
720x576p
) (page 34).
Is the HDMI cable properly
connected?
Try disconnecting the HDMI cable, then securely reconnecting it.
With some cables, 1080p video signals will not be output.
Sound is not produced or is
distorted.
Is
HDMI Out
properly set? Set
HDMI Out
to
LPCM (2CH)
or
Auto
(page 34).
The
HDMI Out
terminal does not output any audio signals except
DVD/CD sound.
Multichannel audio signals
are not output.
Is
HDMI Out
properly set? Set
HDMI Out
to
Auto
(page 34).
The
HDMI Out
terminal does not output any audio signals except
DVD/CD sound.
Colors are not properly
displayed on TV screen.
Is
HDMI Color
properly set? Change the
HDMI Color
setting (page 34).
Problem Check Remedy
Cannot access to the
network.
The LAN cable is not firmly
connected.
Firmly connect the LAN cable (page 9).
The router is not switched on. Switch on the router.
Cannot access to the network
using WPS.
Network Type
is set to
Wired
.
Network Type
must be set to
Wireless
or
Auto
to use WPS
connection. See page 31 to change the network type.
Cannot access to the
component or PC connected
via network.
Internet security software is currently
installed in the connected
component.
There are cases where a component with Internet security software
installed cannot be accessed.
The audio component on the network
which has been switched off is
switched on.
Switch on the audio component on the network before switching on
this unit.
The component connected to the
network is not properly set.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection
status is set to “Do not authorize”.
There are no playable audio files on
the component connected to the
network.
Check the audio files stored on the component connected to the
network.
Playback does not start. The component is currently
disconnected from this unit or the
power supply.
Check whether the component is proper ly connected to this unit or
the power supply.
The PC or Internet radio is
not properly operated.
The corresponding IP address is not
properly set.
Switch on the built-in DHCP server function of your router, or set up
the network manually according to your network environm
ent
(page 36).
The IP address is being automatically
configured.
The automatic configuration process takes time. Please wait.
X-SMC5_SYXZT8_En.book 47 ページ 2011年7月28日 木曜日 午後3時27分
Vue de la page 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 167 168

Commentaires sur ces manuels

Pas de commentaire