Pioneer VSX-S510-S Manuel d'utilisateur Page 51
- Page / 65
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
7
Chapter
7
51
58
7
4
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
•
If headphones are connected to the receiver, disconnect
them.
•
VSX-S510: You can’t use the Home Menu when the
NETRADIO, M.SERVER, FAVORITE, iPod/USB or
ADAPTER input is selected.
•
VSX-S310 only: You can’t use the Home Menu when the
iPod/USB input is selected.
1
Switch on the receiver and your TV.
Press
STANDBY/ON
to switch on.
2
Switch the TV input so that it connects to the receiver.
3
Press , then press
HOME MENU
.
The Home Menu appears on your TV. Use
///
and
ENTER
on the remote control to navigate through the
screens and select menu items. Press
RETURN
to exit
the current menu.
•
Press
HOME MENU
at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
•
Auto MCACC – This is a quick and effective automatic
surround setup (see Automatically setting up for surround
sound (MCACC) on page 23).
•
Manual SP Setup
-
Speaker Setting – Specify the size and number of
speakers you’ve connected (see below).
-
X.Over – Specify which frequencies will be sent to the
subwoofer (page 52
).
-
Channel Level – Adjust the overall balance of your
speaker system (page 52
).
-
Speaker Distance – Specify the distance of your
speakers from the listening position (page 53
).
•
Input Assign
-
Analog Input – Specify what you’ve connected to the
ANALOG IN1 audio input (page 53
).
•
Auto Power Down – Sets to automatically turn off the
power when the receiver has not operated for a preset
amount of time (see The Auto Power Down menu
on
page 54).
•
HDMI Setup – Set the audio return channel function or set
the HDMI input signal to Standby Through output or not
during standby (see HDMI Setup
on page 56).
•
Network Standby (VSX-S510 only) – Allows the AirPlay
function to be used even when the receiver is in the standby
mode (see The Network Standby menu (VSX-S510 only)
on
page 54).
•
MHL Setup (VSX-S510 only) – Changes the settings related
to MHL.
•
Speaker System (VSX-S510 only) – Specifies how you are
using the speaker terminals (page 54
).
•
OSD Setup (VSX-S510 only) – Sets the overlay function ON/
OFF.
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of your
current speaker system or add new speakers).
These settings are designed to fine-tune your system, but if
you’re satisfied with the settings made in Automatically
setting up for surround sound (MCACC) on page 23, it isn’t
necessary to make all of these settings.
Important
•
VSX-S510 only: Depending on the Speaker System setting,
there will be differences in the speaker items that can be
adjusted. The OSD display for these operating instructions
is an example of when the Speaker System setting is set to
Surr. Back.
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers). It is a good idea to make sure that the
settings made in Automatically setting up for surround sound
(MCACC) on page 23 are correct.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use
/
to select the size (and number) of each of the
following speakers:
•
Front – Select LARGE if your front speakers reproduce bass
frequencies effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass frequencies to
the subwoofer.
RECEIVER
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4. Auto Power Down
5. HDMI Setup
6. Network Standby
7. MHL Setup
8. Speaker System
9. OSD Setup
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4. Auto Power Down
5. HDMI Setup
VSX-S510 VSX-S310
2
. Manual SP Setup
Return
a
. Speaker Setting
b
. X.Over
c
. Channel Level
d
. Speaker Distance
2a
. Speaker Setting
Front
Center
Surr
Surr. Back
Subwoofer:
Return
[ SMALL ]
[ SMALL ]
[SMALL x 2]
YES
SMALL
- VSX-S510-K/-S 1
- VSX-S310-K/-S 1
- K058a_A1_En 3
- D3-4-2-2-2a*_A1_En 3
- D41-6-4_A1_En 3
- Contents 4
- Before you start 6
- Controls and displays 7
- Loading the batteries 10
- Connecting your equipment 11
- Bare wire connections 12
- LINE LEVEL 14
- Making cable connections 15
- DC 5V WPS 19
- Ethernet 19
- Using external antennas 20
- Connecting an iPod 21
- Connecting a USB device 21
- S510 only) 21
- Video camera (etc.) 22
- Basic Setup 23
- Basic playback 26
- Playing an iPod 28
- Playing a USB device 29
- Bluetooth 32
- Music (VSX-S510 only) 32
- Listening to the radio 33
- Listening to your system 36
- Using the Sound Retriever 37
- Setting the Audio options 40
- Introduction 42
- About HTC Connect 43
- Basic playback controls 43
- The Network Setup menu 45
- Language 46
- Firmware Update 46
- About network playback 48
- Glossary 49
- About playable file formats 49
- Home Menu 51
- The Input Assign menu 53
- The Auto Power Down menu 54
- HDMI Setup 56
- Before using synchronization 57
- About synchronized operations 57
- Additional information 58
- RECEIVER 59
- Windows 8 61
- FLAC Decoder 62
- Resetting the main unit 63
- Cleaning the unit 63
- Specifications 64
- K002_B3_En 65
Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-S510-S
(27 pages)
(7 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels