Pioneer VSX-S500-S Manuel d'utilisateur télécharger pdf (Page 44)

Additional information

There seems to be a time lag between the speakers and the

output of the subwoofer.

 See Automatically setting up for surround sound (MCACC) on

page 19 to set up your system again using MCACC (this will

automatically compensate for a delay in the subwoofer

output).

After using the Auto MCACC setup, the speaker size setting

(LARGE or SMALL) is incorrect.

 Low-frequency noise could have been caused by an air

conditioner or motor. Switch off all appliances in the room and

rerun the Auto MCACC setup.

Can’t operate the remote control.

 Replace the batteries (refer to page 7).

 Operate within 7 m, 30º of the remote sensor (refer to page 7).

 Remove the obstacle or operate from another position.

 Avoid exposing the remote sensor on the front panel to direct

light.

The display is dark or off.

 Press DIMMER repeatedly to return to the default.

The front panel display switches over for no apparent

reason to various different displays.

 This happens because the demo display is in operation. To

turn off the demo display, press any button to go back to the

original display, or set the FL Demo Mode to OFF (see The FL

Demo Mode menu on page 40).

The receiver doesn’t recognize iPod touch/iPhone.

 Try the following.

1. Simultaneously keep pressing the sleep button and home

button on the iPod touch or iPhone for over 10 seconds to

restart.

2. Turn on the receiver.

3. Connect the iPod touch/iPhone to the receiver.

The

Bluetooth

wireless technology device cannot be

connected or operated. Sound from the

Bluetooth

wireless

technology device is not emitted or the sound is

interrupted.

 Check that no object that emits electromagnetic waves in the

2.4 GHz band (microwave oven, wireless LAN device or

Bluetooth wireless technology apparatus) is near the unit. If

such an object is near the unit, set the unit far from it. Or, stop

using the object emitting the electromagnetic waves.

 Check that the Bluetooth wireless technology device is not too

far from the unit and that obstructions are not set between the

Bluetooth wireless technology device and the unit. Set the

Bluetooth wireless technology device and the unit so that the

distance between them is less than about 10 m and no

obstructions exist between them.

 Check that the Bluetooth ADAPTER and the ADAPTER PORT

terminal of the unit are correctly connected.

 The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless

technology device.

 Check that pairing is correct. The pairing setting was deleted

from this unit or the Bluetooth wireless technology device.

Reset the pairing.

 Check that the profile is correct. Use a Bluetooth wireless

technology device that supports A2DP profile and AVRCP

profile.

NETWORK feature

Cannot access the network.

 The LAN cable is not firmly connected. Firmly connect the

LAN cable (page 16).

 The router is not switched on. Switch on the router.

 Internet security software is currently installed in the

connected component. There are cases where a component

with Internet security software installed cannot be accessed.

 The audio component on the network which has been

switched off is switched on. Switch on the audio component

on the network before switching on this receiver.

Playback does not start while ‘Connecting Wired...’

continues to be displayed.

 The component is currently disconnected from this receiver or

the power supply. Check whether the component is properly

connected to this receiver or the power supply.

The PC or Internet radio is not properly operated.

 The corresponding IP address is not properly set. Switch on

the built-in DHCP server function of your router, or set up the

network manually according to your network environment

(page 25).

 The IP address is being automatically configured. The

automatic configuration process takes time. Please wait.

The audio files stored on components on the network, such

as a PC, cannot be played back.

 Windows Media Player 11 or Windows Media Player 12 is not

currently installed on your PC. Install Windows Media Player

11 or Windows Media Player 12 on your PC.

 Audio files were recorded in formats other than MP3, WAV

(LPCM only), MPEG-4 AAC, FLAC, and WMA. Play back audio

files recorded in MP3, WAV (LPCM only), MPEG-4 AAC, FLAC,

or WMA. Note that some audio files recorded in these formats

may not be played back on this receiver.

 Audio files recorded in MPEG-4 AAC or FLAC are being played

back on Windows Media Player 11 or Windows Media Player

12. Audio files recorded in MPEG-4 AAC or FLAC cannot be

played back on Windows Media Player 11 or Windows Media

Player 12. Try using another server. Refer to the operation

manual supplied with your server.

 The component connected to the network is not properly

operated.

Check whether the component is affected by special

circumstances or is in the sleep mode.

Try rebooting the component if necessary.

 The component connected to the network does not permit file

sharing. Try changing the settings for the component

connected to the network.

 The folder stored on the component connected to the network

has been deleted or damaged. Check the folder stored on the

component connected to the network.

Cannot access the component connected to the network.

 The component connected to the network is not properly set. If

the client is automatically authorized, you need to enter the

corresponding information again. Check whether the

connection status is set to “Do not authorize”.

 There are no playable audio files on the component connected

to the network. Check the audio files stored on the component

connected to the network.

Audio playback is undesirably stopped or disturbed.

 The audio file currently being played back was not recorded in

a format playable on this receiver.

Check whether the audio file was recorded in a format

supported by this receiver.

Check whether the folder has been damaged or corrupted.

Note that there are cases where even the audio files listed as

playable on this receiver cannot be played back or displayed

(page 47).

 The LAN cable is currently disconnected. Connect the LAN

cable properly (page 16).

 There is heavy traffic on the network with the Internet being

accessed on the same network. Use 100BASE-TX to access

the components on the network.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-S500-S Manuel d'utilisateur Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-S500-S