Pioneer VSX-922-S Manuel d'utilisateur télécharger pdf (Page 61)

Using other functions

Switching the speaker terminals

If you selected Normal(SB/FH), Normal(SB/FW) or Speaker B at Speaker system setting on page 79, you can

switch between speakers using the SPEAKERS button. If you selected Front Bi-Amp or ZONE 2, the button will

simply switch your main speaker terminals on or off.

1 Press to the receiver operation mode.

2 Use SPEAKERS to select a speaker system setting.

As mentioned above, if you have selected Front Bi-Amp or ZONE 2, the button will simply switch your main

speaker terminal (A) on or off.

Press repeatedly to choose a speaker terminal option:

When you select Normal(SB/FH), you can select from:

! SP: SB/FH ON – Surround back or front height channels are added to the front, center and surround chan-

nels (maximum 5 channels) and a maximum of 7 channels are output. The surround back and front height

channels are switched automatically according to the audio input signal.

! SP: SB ON – Surround back channels are added to the front, center and surround channels (maximum 5

channels) and a maximum of 7 channels are output.

! SP: FH ON – Front height channels are added to the front, center and surround channels (maximum 5 chan-

nels) and a maximum of 7 channels are output.

! SP: OFF – No sound is output from the speakers.

When you select Normal(SB/FW), you can select from:

! SP: SB/FW ON – Surround back or front wide channels are added to the front, center and surround channels

(maximum 5 channels) and a maximum of 7 channels are output. The surround back and front wide channels

are switched automatically according to the audio input signal.

! SP: SB ON – Surround back channels are added to the front, center and surround channels (maximum 5

channels) and a maximum of 7 channels are output.

! SP: FW ON – Front wide channels are added to the front, center and surround channels (maximum 5 chan-

nels) and a maximum of 7 channels are output.

! SP: OFF – No sound is output from the speakers.

When you select Speaker B, you can select from:

! SP: A ON – Sound is output from the A-speaker terminals (up to 7 channels (including surround back chan-

nels), depending on the source).

! SP: B ON – Sound is output from the two speakers connected to the B-speaker terminals. Multichannel

sources will not be heard.

! SP: A+B ON – Sound is output from the A-speaker terminals (up to 5 channels, depending on the source), the

two speakers connected to the B-speaker terminals, and the subwoofer. The sound from the B-speaker termi-

nals will be the same as the sound from the A-speaker terminals (multichannel sources will be downmixed to

2 channels).

! SP: OFF – No sound is output from the speakers.

Note

! The subwoofer output depends on the settings you made in Manual speaker setup on page 79. However, if SP:

B ON is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).

! All speaker systems (except Speaker B connections) are switched off when headphones are connected.

Using the MULTI-ZONE controls

The following steps use the front panel controls to adjust the sub zone volume and select sources. See MULTI-

ZONE remote controls on page 62.

1 Press MULTI-ZONE ON/OFF on the front panel.

Each press selects a MULTI-ZONE option:

! ZONE 2 ON – Switches the MULTI-ZONE feature on

! MULTI ZONE OFF – Switches the MULTI-ZONE feature off

The MULTI-ZONE indicator lights when the MULTI-ZONE control has been switched ON.

2 Press MULTI-ZONE CONTROL on the front panel.

! When the receiver is on, make sure that any operations for the sub zone are done while ZONE 2 shows in the

display. If this is not showing, the front panel controls affect the main zone only.

3 Use the INPUT SELECTOR dial to select the source for the sub zone.

For example, ZONE 2 DVD sends the source connected to the DVD inputs to the sub room (ZONE 2).

! If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets

on page 40 if you’re unsure how to do this). The tuner cannot be tuned to more than one station at a time.

Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not

to change stations when recording a radio broadcast.

4 When Speaker System is set to ZONE 2, use the MASTER VOLUME dial to adjust the volume

for the sub zone.

In case of VSX-1122

! Even if Speaker System is not set to ZONE 2, the volume of the sound being output from the AUDIO ZONE 2

OUT terminals can be adjusted. Adjust the volume as desired using the MASTER VOLUME dial.

! When Speaker System is set to anything other than ZONE 2, the volume output from the receiver’s AUDIO

ZONE 2 OUT terminals can be fixed to –40 dB or 0 dB and the volume can be adjusted from the connected

amplifier. If you want to adjust the volume from the connected amplifier, see ZONE Setup on page 84.

5 When you’re finished, press MULTI-ZONE CONTROL again to return to the main zone

controls.

You can also press MULTI-ZONE ON/OFF on the front panel to switch off all output to the sub zone.

! You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control

first.

! If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main

rooms so that this receiver is in standby.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 108 109

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-922-S Manuel d'utilisateur Page 61

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-922-S