Pioneer VSX-821 Manuel d'utilisateur télécharger pdf (Page 10)

Connecting your equipment

Chapter 2:

Connecting your

equipment

Determining the speakers’ application

By connecting the left and right front speakers (L/R), the

center speaker (C), the left and right surround speakers (SL/

SR), the left and right surround back speakers (SBL/SBR) (or

the left and right front height speakers (FHL/FHR)), and the

subwoofer (SW), a surround sound system up to 7.1 channel

can be enjoyed.

The 5.1 channel surround system is the most commonly-

used in home theaters. To achieve the best possible surround

sound, install your speakers as shown below.

Important

• VSX-826 only: Both the surround back speakers and the

front height speakers can be connected at the same time.

In this case, sound will be output from either the front

height speaker or the surround back speaker depending

on which one was selected in the Speaker System

setting (see The Speaker System setting (VSX-826 only) on

page 41).

• VSX-821 only: To connect the surround back or front

height speakers, an additional amplifier is required.

Connect the additional amplifier to the PRE OUT SURR

BACK/FRONT HEIGHT outputs of this unit and connect

the surround back or front height speakers to the

additional amplifier (see Connect the surround back or

front height speakers (In case of VSX-821) on page 11).

Another way, you can use the speakers connected to the B

speaker terminals to listen to stereo playback in another

room. See Switching the speaker terminal on page 13 for the

listening options with this setup.

• VSX-826 only: You will not be able to connect the B

speakers if you connect the front height speakers in

the main zone. Further, if you use the B speakers, a

5.1 ch playback will be the maximum in the main zone.

(No sound is output from the surround back speaker.)

Some tips for improving sound quality

Where you put your speakers in the room has a big effect on

the quality of the sound. The following guidelines should help

you to get the best sound from your system.

• It is best to angle the speakers towards the listening

position. The angle depends on the size of the room. Use

less of an angle for bigger rooms.

• Refer to the chart below for placement of speakers you

intend to connect.

Place the surround speakers at 120º from the center. If

you, (1) use the surround back speaker, and, (2) don’t

use the front height speakers, we recommend placing

the surround speaker right beside you.

If you intend to connect only one surround back

speakers, place it directly behind you.

If the surround speakers cannot be set directly to the

side of the listening position with a 7.1-channel system,

the surround effect can be enhanced by turning off the

Up Mix function (see Setting the Up Mix function on

page 35).

• For the best stereo effect, place the front speakers 2 m to

3 m apart, at equal distance from the TV.

• If you’re using a center speaker, place the front speakers

at a wider angle. If not, place them at a narrower angle.

• Place the center speaker above or below the TV so that the

sound of the center channel is localized at the TV screen.

Also, make sure the center speaker does not cross the

line formed by the leading edge of the front left and right

speakers.

5.1 channel surround

system:

6.1 channel surround

(Surround back) system:

FHL

FHR

SBL

SBR

7.1 channel surround

(Surround back) system:

7.1 channel surround

(Front height) system:

Main zone

Speaker B

FHL

SBL

SBR

FHR

30 30

120 120

VSX-821_826_SYXCN_En.book 10 ページ２０１１年２月９日　水曜日　午後３時４８分

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-821 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-821